Bilstein shocks top nut thread type ?

Help please !

Can anyone tell me what thread type of the top nut on on my bilstein rear shocks is please , as they are not the same as the opriginals that I have taken off

Also where can I get them ?

As always thanks in advance

M10 i think

i had the same problem when i fitted bilsteins to mine and i just used a standard m10

I have tried an M10 but it is definately different, someone did suggest that there is a standard metric and also a fine metric. The thread is definately finer than a standard metric thread!!!!!!!!  :dontknow:

If there is a FINE metric thread(or am I just going nuts?), if so anyone got any idea where to get them from as everywhere I have been have only sold Metric,UNF etc     :dontknow:

M10 with a 1.25mm thread i think

any shop which sells nuts and bolts i.e any motorfactors or god forbid, halfords should sell M10 fine nuts aswell as the standard course nuts.
if you are really struggling i think alot of jap motors use this size thread on the top strut mounts aswell.

There are 3 pitches for M10. 1.0mm, 1.25mm, 1.5mm. 1.5mm is the standard course pitch and 1.25mm is the fine. 1.0mm is sometimes referred to as extra fine.