16V-R1 CARB CONVERSION

CAN ANY 1 TELL ME IF ITS HARD TO PUT YAMAHA R1 BIKE CARBS ONTO MY 16V ENGINE AND IF IT CAN BE DUN DOES ANY 1 HAVE ANY FAQS ON HOW TO DO ITjavascript:emoticon('')

get in touch with a company called bogg bros they can tell you everything you need to know make you a inlet manifold and set the carbs up fr you.

As above, or make your own inlet and get them just to set the carbs up
for you, the guy's are good but busy 8)

patchy said

CAN ANY 1 TELL ME IF ITS HARD TO PUT YAMAHA R1 BIKE CARBS ONTO MY 16V ENGINE AND IF IT CAN BE DUN DOES ANY 1 HAVE ANY FAQS ON HOW TO DO ITjavascript:emoticon('')

its not hard what do you want to know

i had an inlet made for 50 pounds and its ace then i bolted zxr 600 carbs to it all i need to do is get it to run lol

did u get the carbs rejetted?

ive not had them jeted yet ive just drilled hem out to 1.5mm to start with but i think ive got over probs with the wireing as it dont want to start !
i had the car runing on the twin 40s but even then it took some time to start

i'd get them rejetted as that could be the reason that it aint startin……