Mk1 Ce1 VR6 conversion

Hi

Sorry if this is already posted I have exhausted all my attempts to find a solution online so here goes.

https://clubgti.com/forums/index.php?threads/ce1-abf-splicing-of-looms-help.249714/

On the above link Rub Jonny said vr6 loom should be the same as the abf so queries below;

Ce2 (F/5) needs wiring to Ce1 (C/18) F/5 is blank?

I have wired all the other wires in as mentioned on that thread.

Below is my findings on my multimeter on the pins on the ecu connector (OBD2 ECU)

"-" means blank

Pin.  Volt
1.   0
2.   0
3.   0
4.   0
5.   -
6.   12
7.   7
8.   12
9.   -
10.  -
11.  -
12.  0
13.  -
14.  7
15.  -
16.  0
17.  0
18.  -
19.  -
20.  0
21.  -
22.  0
23.  0.04
24.  0
25.  0
26.  0
27.  0
28.  -
29.  -
30.  -
31.  0
32.  -
33.  7
34.  1.6
35.  -
36.  7
37.  0
38.  -
39.  0
40.  7
41.  7
42.  0
43.  0
44.  0
45.  -
46.  -
47.  -
48.  -
49.  -
50.  -
51.  0
52.  12
53.  0
54.  0
55.  -
56.  7
57.  1.6
58.  -
59.  -
60.  12
61.  -
62.  7
63.  -
64.  -
65.  0
66.  -
67.  0
68.  0

Any help would be appreciated I don't want to connect the ecu and it go pop.

Thanks

I would send RubJonny a Private message on this forum or clubgti. He is a very helpful chap  .