Last few wiring plugs!

I've looked through the fuse box thread but I'm still struggling. I think the long grey and black might be something to do with brake warning but don't know where to plug it!

1. headlight range control
2. live for interior light, plus central locking if installed
3. spare ignition live
4. handbrake warning light

Cheers John,
So where does it plug in to please mate, I already have a brown and brown/yellow at the handbrake lever (plugged the br/yl in to the spade on the lever and earthed the brown but nothing happened so left them unplugged!)

I've just posted in Heeeelp about a issue with it charging the battery and battery light if you've got a couple of mins to have a read/think it would be gratefully received as usual 

1. nowhere
2. interior light red wire coming down from the A pillar (yours will be passenger side!)
3. nowhere, unless you have something which needs an ignition live feed, say VDO gauges, electric windows, etc
4. handbrake warning LIGHT

 so is there a connector for it on the back of the clocks housing?

see on the mk2 dash right, theres a handbrake light? it plugs into that

Sorry fella don't get it!

and the problem becomes clear

Between the two rows of switches?

Again. 

Yes.

yep thats where it goes

 Please now forward to my next issue titled " Battery not charging" 

https://www.ebay.co.uk/itm/362071260196

Cheers John.

(Just edited due to my address being on the order!).

only thing he recons it needs a new bulb, but see how you go. its only a 12v 'grain of wheat' type, pop down local factors.  it was the cheapest one i could find with the bulb holder still attached the others were all missing that bit

Guessing I need to do something with the wires at the handbrake lever end?

Is it brown down to earth and the brown/yellow to the spade connector on the lever mech?

all it is the mk2 switch is 2 pin, so needs an earth. yours earths to the shell, so doesnt. you ignore the mk2 earth, just pop the other wire to your switch job jobbed. its the brown/yellow you want, ignore the brown

Dear Rub,

I bow to your Greatness…….  to know which connector is which with but a glance… I would need to know more specifics….again with all humility….

Briano

I may add a small note that on my Cabbies, it is very easy to get the connector for the Brake light and the seat belt warning on bass-ackwards as it is the only non-Irish Proof connector, and I have done it a time or two.

Cheers Brian when you've messed with as many looms as I have it becomes second nature

no seatbelt warning for us thankfully, but on that note on the mk2 golf its easy to mix up the heater panel and handbrake lights up as they have the same plug on and near each other