Skip navigation

Anyone know where this connector goes?

Post

Back to the top
I've lost the label off this brown wire with a 2 pin connector on it.  Anybody know what it's for and where it goes please.  Could it be coolant level sensor?

P1030906_LI.jpg

Post

Back to the top

Anyone know where this connector goes?

I might be wrong but looks more like the connection I have that goes to the side of the engine


Sent from my iPhone using Tapatalk

Post

Back to the top
You don't say what model/year the car is but the Haynes manual for 1981 GTi shows the water level sensor having a brown and a yellow/red pair going to it. Unfortunately I have found that the wiring colours do not always match my car!

Phil Chambers

Post

Back to the top
Pete,

what colour are the wires? I can have a look on mine and then cross ref with my Haynes this evening. (I'll be doing some wiring repairs anyway). That said, I have a sneaky suspicion it's the same wire I was looking at thinking - "where the hell does that go?"

J

My rebuild thread I will try and keep up to date: here

K-Jet fuel pressure test guage How-To

Post

Back to the top

Anyone know where this connector goes?

Is the connector covered by a black rubber sleeve?If so it looks like the one that goes to brake master cylinder reservoir


Sent from my iPhone using Tapatalk

Post

Back to the top
I have 2 of those connectors on mine.
Blue with brown stripe and brown is the brake fluid level. It's in a black sleeve. The other one looks to be blue/red with brown in a light brown sleeve. I can't find a wire that colour in the Haynes diagram covering 83 onwards. It is shown on golf cabs from 84 and is the coolant level. Mine doesn't have a coolant level thingy on the tank.

My rebuild thread I will try and keep up to date: here

K-Jet fuel pressure test guage How-To

Post

Back to the top

paceman said

I have 2 of those connectors on mine.
Blue with brown stripe and brown is the brake fluid level. It's in a black sleeve. The other one looks to be blue/red with brown in a light brown sleeve. I can't find a wire that colour in the Haynes diagram covering 83 onwards. It is shown on golf cabs from 84 and is the coolant level. Mine doesn't have a coolant level thingy on the tank.

You're right Jason, it's a red/blue wire and a brown wire in a brown sleeve.  I think it's all pointing towards the coolant level sensor so that's great.  There's literally nowhere else for it to go!!

Thanks for all your help folks, the assistance on this forum is second to none.
0 guests and 0 members have just viewed this: None.