wiper problem (not parking)
Posted
#817638
(In Topic #97729)
Old Timer
wiper problem (not parking)
ive got a problem with my front wiper (single wiper conversion), when you switch it to intermittent it parks fine but when you switch it on all the time then switch it off it just stops wherever it is, doesnt seem to park in the centre?? ive changed the motor but made no difference, switch perhaps? anyone else had this problem??
Mk1 Jetta (Jessie) build thread here
View topic: Jessie the mk1 jetta (pd conversion) lots of pics!! - The Mk1 Golf Owners Club
T25 westfalia camper, 2.2 Subaru powered
vw touran 1.9 tdi remap, Bbs rep wheels , lowered, bla bla bla……… Wife's car
2013 Vw amarok 2.0bitdi, work truck……. www.jsgarageaberystwyth.co.uk
View topic: Jessie the mk1 jetta (pd conversion) lots of pics!! - The Mk1 Golf Owners Club
T25 westfalia camper, 2.2 Subaru powered
vw touran 1.9 tdi remap, Bbs rep wheels , lowered, bla bla bla……… Wife's car
2013 Vw amarok 2.0bitdi, work truck……. www.jsgarageaberystwyth.co.uk
Posted
Settling In
Sorry, dont know the solution but would be interested if someone does.
Jay
Posted
Settled In
Posted
Settled In
If it's any help to anyone I used a new mk3 motor for my conversion and therefore did not have the mk3 plug and loom to connect into my original loom. After much trawling I managed to figure out the colour coding to connect to the motor plug - as follows.
Pin 1 = Brown (Earth)
Pin 2 = Green
Pin 3 = Green / Black
Pin 4 = Green / Yellow
Pin 5 = Black / Grey
Posted
Settling In
My motor had packed up and looking to change it.
Posted
Settled In
the replacement motors sit on the linkage a little differently but there are no issues with clearance
Old motor
Posted
Settling In
Posted
Settled In
http://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313.TR0.TRC0.H0.TRS0&_nkw=1J0955119&_sacat=0
Posted
Settling In
Posted
Settled In
0 guests and 0 members have just viewed this: None.