Sensor wiring for Cabby KR 16v Conversion on ZX9R Carbs

I have mostly completed my conversion.
I was hoping to find wiring info for the sensors from the MK1 cabby loom to the KR.

I am sure this question has been asked but I have spen the last 2hours on various forums trying to find the answers to no avail.

The KR..

3 water temp sensors on the side of the head.
1 x dash gauge
1 x ECU
1 x ISV

Low pressure oil is on the back of head
High pressure oil top of oil filter housing.

I also have another sensor on the lower down on the oil filter housing same large type as the High oil pressure sender.

What colour wires from the MK1 loom go where.

Mk1

1 x purple/black and black(live) - (twin connector)
1 x black/yellow and black(live) - (twin connector)
1 x orange/red and brown(live) - (twin connector)

1 x blue/black
1 x yellow


looking forward to your help

Paul