indicators blowing fuses

OK have fitted another engine in my golf gti. it is running 16v on carbs so cut all the injection wiring off the vehicle.

Anyway have got a set of led indicators and am trying to fit a resistor to slow the flashing down.

ok now the problem. I am blowing fuse 19 as soon as the ignition is switched on. I have the hazard switch in place and the hazards work fine.
 but I don't understand whats going on. Would the fact I don't have the clocks in make a difference.


Thanks


Gary

can anyone help.    :dontknow:  :dontknow:

Disconnect the led indicators replace the fuze , does it blow ?

No led indicators at fault .

Clocks not fitted should not make a difference .

Thanks for the reply.

ok tried that and still blowing fuses.

they were working before. have fitted another engine and removed the injection wireing from the engine bay.

Short somewhere in dash wiring , better trace it .

I will check tomorrow will look and see if there is anything shorting.

Thanks for the advice.

Cheers
Will let you know how I get on.

Ok fixed it had a dumb blonde moment. the live feed from the hazard switch the blue/black wire was not connected and shorting on the dash simple fix.

Sweet !