indicator issue please help

hi guys
basically i have replaced the relay and the hazard switch and when i inticate the indicator lights just stays on and when i turn on the hazard switch the indicator light stays on as well any ideas?
cheers
max

dodgy relay?

dodgy earth??

where would i find the earth for the indicators??

looked at the fuses and two of them have blown so i replaced them now the indicator light stays on and when you indicate the light goes brighter but not indicating. please need to use the car

Did you replace with a brand new hazard switch? And do the indicators work with the hazard switch half on but half off if you get what I mean?

yes brand new switch, will check that out

they still ont work if you put the switch on half full any more ideas??

Did you replace the relay with the correct type?

well i odered an indicator relay and put it where the old one was so yeah i am pritty sure i have done yes.

can anybody tell me where the earth is for the indicators??
cheers

i have found out something new today, when i turn the hazard light switch on and then off it takes about 20 seconds for the indicator light to off from staying on constantly. and just to verify when indicating the light stays on constantly as well. please somebody give me some e
advise on what to do??
cheers
max