Gages not working (sorry i have looked about first)

My oil light is flashing (I have checked and cleaned up sensors)
My tempter gages is not working and the light is flashing (water level right)
And my petrol gage is not working.
I have checked all the plugs in the back of the clocks to make sure nothing is loss but al seems to be ok

Any help would be great full thanks  

dan

Hi
Check the voltage regulator on the clocks one of the pins should output 10 volts. hope this helps

thanks i will give it a tri tomorrow night
 

its got 10volts there  :cry:

any other Suggestions ?????

please

I had a similar problem, I checked the earths from the multi plug on the clocks, check ed the live and they were both fine. I then looked at the printed circut on the back of the clocks and saw a broken track near the bottom-bridged the gap and bingo-worked for me so only a suggestion for you.
Good luck