Fitting a stereo

I have wired in the stereo and it works great however there seems to be a facia part missing so the stereo slips back into the area behind the dash board…..

Does anyone know if there is an extra facia part needed to hold it in place??

Ta v much!

ther should be a cage with the sterio that slips in to the hole 1st then bend the tags out that are in the front edge inside it.  if the dash hole is too big for it then you can get a plate trim that adds a 4-5 mm lip so that it dont slip back in. try halfords for autoleads kit FP004 that mite be what you need

The stereo did not come with a cage as it was bought off the forum. Will check out Halfords for the plate trim.
Thanks for ya help!