9" Servo and 22mm Master Cylinder
Posted
#1576468
(In Topic #212640)
Settled In
Hi
I'm looking to upgrade the braking system on the mk 1 cabby (89 model) and from what I've read a 9"servo and 22mm master cylinder can make all the difference.
Please let me know if anyone is selling or perhaps point me in the right way where I can buy from
Cheers guys
I'm looking to upgrade the braking system on the mk 1 cabby (89 model) and from what I've read a 9"servo and 22mm master cylinder can make all the difference.
Please let me know if anyone is selling or perhaps point me in the right way where I can buy from
Cheers guys
Posted
Old Timer
Saw one (servo) on ebay the other day, new, only £200. You only need the bigger mc if you have fitted the larger g60 calipers, and the larger servo will only mean you press less hard, wont improve braking.
Posted
Settled In
abfmk1
Thanks for the reply. I haven't upgraded the calipers to the g60…..Do you think personally it's not worth doing then mate?
Posted
Old Timer
Personally no, unless you have the g60 calipers and 280 mm discs. I have found it possible to lock the standard front brakes and that's as good as it gets. Fit the larger servo if you like to make for a lighter and more modern feel.
Posted
Settled In
Bump
Posted
Old Timer
I was under the impression if you fitted the 16v servo you had no choice but to fit the bigger master cylinder as well??
Brand new m/c can be had for under £30 on ebay, mine was £24 delivered.
Your best bet with the servos is to keep looking for "Mk2 golf breaking" on ebay until you find a 16v and drop the seller a message asking how much for the servo.
I bagged mine for £30 delivered, that way you'll probably get one for the amount they should be sold for an not inherit the Mk1 golf tax that goes with it
Brand new m/c can be had for under £30 on ebay, mine was £24 delivered.
Your best bet with the servos is to keep looking for "Mk2 golf breaking" on ebay until you find a 16v and drop the seller a message asking how much for the servo.
I bagged mine for £30 delivered, that way you'll probably get one for the amount they should be sold for an not inherit the Mk1 golf tax that goes with it
Current rides:
2003 BMW 330d Manual Saloon Msport
1985 GTI cabriolet black edition (42k miles)
1999 Triumph Daytona 955i Post apocalyptic, rat, brat, scrambler, steam punk, cafe racer
2003 BMW 330d Manual Saloon Msport
1985 GTI cabriolet black edition (42k miles)
1999 Triumph Daytona 955i Post apocalyptic, rat, brat, scrambler, steam punk, cafe racer
Posted
Settled In
WATERNAIR said
I was under the impression if you fitted the 16v servo you had no choice but to fit the bigger master cylinder as well??
Brand new m/c can be had for under £30 on ebay, mine was £24 delivered.
Your best bet with the servos is to keep looking for "Mk2 golf breaking" on ebay until you find a 16v and drop the seller a message asking how much for the servo.
I bagged mine for £30 delivered, that way you'll probably get one for the amount they should be sold for an not inherit the Mk1 golf tax that goes with it
Mate you got yours for a bargain! I must have missed it on ebay….ive been sesrching for awhile but some people are asking for silly money!
You defo need a biggrr master cylinder to go eith the servo.
Was yours in a good condition?
Ill try "mk2 breaking" thanks for the tip
Posted
Old Timer
Mine wasnt great but nothing a flap wheel on the drill and a bit of VHT paint didnt fix
Did notice one got listed on ebay yesterday for £10 start, looked good and refurbed with the ate sticker reapplied as well
Did notice one got listed on ebay yesterday for £10 start, looked good and refurbed with the ate sticker reapplied as well
Current rides:
2003 BMW 330d Manual Saloon Msport
1985 GTI cabriolet black edition (42k miles)
1999 Triumph Daytona 955i Post apocalyptic, rat, brat, scrambler, steam punk, cafe racer
2003 BMW 330d Manual Saloon Msport
1985 GTI cabriolet black edition (42k miles)
1999 Triumph Daytona 955i Post apocalyptic, rat, brat, scrambler, steam punk, cafe racer
Posted
Settled In
Re:
HeyWATERNAIR said
Mine wasnt great but nothing a flap wheel on the drill and a bit of VHT paint didnt fix
Did notice one got listed on ebay yesterday for £10 start, looked good and refurbed with the ate sticker reapplied as well
Do you have a link?
Did you sand and then paint? Any chance you could take some pictures. Really interested to see the end result. Thanks
Sent from my SM-G920F using Tapatalk
Posted
Old Timer
http://www.ebay.co.uk/itm/263886750665
I didnt spend a lot of time on it just flap wheeled and direct paint, mine was fairly rough so I knew it would be pitted anyway unless I got busy with filler but I didnt think it was worth it.
The servo is actually quite well hidden away by the time the reservoir is in place so unless shows are in mind I would worry to much about finish.
I'll try to take some this afternoon when I'm fitting the new suspension
I didnt spend a lot of time on it just flap wheeled and direct paint, mine was fairly rough so I knew it would be pitted anyway unless I got busy with filler but I didnt think it was worth it.
The servo is actually quite well hidden away by the time the reservoir is in place so unless shows are in mind I would worry to much about finish.
I'll try to take some this afternoon when I'm fitting the new suspension
Current rides:
2003 BMW 330d Manual Saloon Msport
1985 GTI cabriolet black edition (42k miles)
1999 Triumph Daytona 955i Post apocalyptic, rat, brat, scrambler, steam punk, cafe racer
2003 BMW 330d Manual Saloon Msport
1985 GTI cabriolet black edition (42k miles)
1999 Triumph Daytona 955i Post apocalyptic, rat, brat, scrambler, steam punk, cafe racer
Posted
Old Timer
As promised, not great pics as its very obscured and the engine bay is generally dirty from me taking a radiator hose that was hotter than I expected the other day and letting it spray everywhere
Its in there somewhere I'm sure of it lol.
Looks to of lost some paint on the bottom side and was extremely hard to get into place without covering in scratches but either way it doesnt look terrible and it works.
I think my entire brake system cost less than £200 for servo, m/c, all new copper lines, braided hoses, handbrake cables, discs, pads, caliper paint, drums, shoes, springs, brake cylinders and brake reservoir
Works brilliantly and its pretty much all padgid parts
Its in there somewhere I'm sure of it lol.
Looks to of lost some paint on the bottom side and was extremely hard to get into place without covering in scratches but either way it doesnt look terrible and it works.
I think my entire brake system cost less than £200 for servo, m/c, all new copper lines, braided hoses, handbrake cables, discs, pads, caliper paint, drums, shoes, springs, brake cylinders and brake reservoir
Works brilliantly and its pretty much all padgid parts
Current rides:
2003 BMW 330d Manual Saloon Msport
1985 GTI cabriolet black edition (42k miles)
1999 Triumph Daytona 955i Post apocalyptic, rat, brat, scrambler, steam punk, cafe racer
2003 BMW 330d Manual Saloon Msport
1985 GTI cabriolet black edition (42k miles)
1999 Triumph Daytona 955i Post apocalyptic, rat, brat, scrambler, steam punk, cafe racer
Posted
Settled In
Thanks for the pictures, it looks very neat!
I managed to bag a mk2 servo and master cylinder. But I need the brake reservoir and the brake adaptors - do you know which ones?
I managed to bag a mk2 servo and master cylinder. But I need the brake reservoir and the brake adaptors - do you know which ones?
Posted
Old Timer
For the brake reservoir I found that loads of vw had the same one as the 16v.
Some have a take off for hydro clutch, some have the take up plugged from the factory and some didnt have one at all.
I cant even remember what mine came from now but I know the lupos and polo's had the same one.
Mine has a plugged take off, I just got the clearest one I could, mine is fitted backwards and cost a fiver
Some have a take off for hydro clutch, some have the take up plugged from the factory and some didnt have one at all.
I cant even remember what mine came from now but I know the lupos and polo's had the same one.
Mine has a plugged take off, I just got the clearest one I could, mine is fitted backwards and cost a fiver
Current rides:
2003 BMW 330d Manual Saloon Msport
1985 GTI cabriolet black edition (42k miles)
1999 Triumph Daytona 955i Post apocalyptic, rat, brat, scrambler, steam punk, cafe racer
2003 BMW 330d Manual Saloon Msport
1985 GTI cabriolet black edition (42k miles)
1999 Triumph Daytona 955i Post apocalyptic, rat, brat, scrambler, steam punk, cafe racer
Posted
Settled In
Thanks mate. You did really well. I've found someone who will sell one for £15 inc pnp. Not the clearest looking bottle though.
Also, what braided brake lines did you go for?
Did you put adaptors in for the brake servo?
Also, what braided brake lines did you go for?
Did you put adaptors in for the brake servo?
Posted
Old Timer
I've got a feeling I've got Goodridge front hoses and Hel rears.
I got the fronts cheap (£20 I think) and paid the full £30 for the rears.
No adapters were used anywhere on mine.
I did consider buying a shim plate to fit between the M/C and the servo because there are horror stories of the brakes gradually coming on and locking.
This is caused by the M/C not being compatible with the length of the rod inside the servo and a slim adapter 3-5mm would cure this but it wasnt needed in my case.
Apart from that I just bolted the rear anti lock valves on to the M/C and went from there with the fresh brake lines.
Fortunate enough to have the brake light switch on the pedal so it was a fairly simple job
I got the fronts cheap (£20 I think) and paid the full £30 for the rears.
No adapters were used anywhere on mine.
I did consider buying a shim plate to fit between the M/C and the servo because there are horror stories of the brakes gradually coming on and locking.
This is caused by the M/C not being compatible with the length of the rod inside the servo and a slim adapter 3-5mm would cure this but it wasnt needed in my case.
Apart from that I just bolted the rear anti lock valves on to the M/C and went from there with the fresh brake lines.
Fortunate enough to have the brake light switch on the pedal so it was a fairly simple job
Current rides:
2003 BMW 330d Manual Saloon Msport
1985 GTI cabriolet black edition (42k miles)
1999 Triumph Daytona 955i Post apocalyptic, rat, brat, scrambler, steam punk, cafe racer
2003 BMW 330d Manual Saloon Msport
1985 GTI cabriolet black edition (42k miles)
1999 Triumph Daytona 955i Post apocalyptic, rat, brat, scrambler, steam punk, cafe racer
Posted
Settled In
Thanks for that mate. I just got the brake servo and master cylinder blasted. So will look to paint and prime the servo and cylinder! Is there a particular black I should go for? Do i need to primer the cylinder too?
Posted
Old Timer
I left the m/c in silver.
I used VHT black for the servo purely because I had loads of it and figured that there may be enough heat in the engine bay to warrant it
I used VHT black for the servo purely because I had loads of it and figured that there may be enough heat in the engine bay to warrant it
Current rides:
2003 BMW 330d Manual Saloon Msport
1985 GTI cabriolet black edition (42k miles)
1999 Triumph Daytona 955i Post apocalyptic, rat, brat, scrambler, steam punk, cafe racer
2003 BMW 330d Manual Saloon Msport
1985 GTI cabriolet black edition (42k miles)
1999 Triumph Daytona 955i Post apocalyptic, rat, brat, scrambler, steam punk, cafe racer
0 guests and 0 members have just viewed this: None.