Could someone give me some ignition advice please

Some muppet hot wired my car and messed up the ignition, I have someone fixing it for me but we have no idea what it is supposed to look like in there or what parts are needed:

It is a 1.1

It has the barrel etc and then some terminals….what connects those terminals to the wiring loom? Is there a plug? spades or what? There didn't seem to be any debris of a plug or spades or anything so bit confused….can someone with a lot more knowledge than me help me out please with what I need to replace? would be much appreciated.

Thanks

If they are the same i have an exposed one on my project i will take a pic tomorrow and post it on here for you so you know what your working with/to!

they should have a plastic plug housing, its the same as pre-90 mk2 golf amongst others.

30 - red - perm live
15 - black (2 wires here) - ignition live
50 - red/black - starter cranking live
X - yellow/black (may have 2 wires as well) - x-over relief relay live
P - grey - parking lights (if fitted)

Thanks a photo or part purchase link would be a massive help thank you.

part number is 111953631
VW Electrical Connector - T3 | LT1 | Caddy 1 / Ignition Switch

you'll need proper latched 6.3 spades on your wires to use it, otherwise you'll have to try to find one 2nd hand with some wires still attached