Skip navigation

mk1 gti carbriolet c/w 1.8 16valve conversion parts

Post

Back to the top

mk1 gti carbriolet c/w 1.8 16valve conversion parts

hi to all
thanks for looking at my ad
Here is direct link to pictures that have took so far, if you need any more let me know and will do my best

http://s281.photobucket.com/albums/k...64/golf%20mk1/

what i have is a reg A— WOL mk1 golf cabriolet, white with a black roof.
I have had this car for about 3 - 4 years and bought as long term project, which i have done work on but now has to go to fund a newer car for work.
The work done so far :-
sorted out the electrics, fitted mk2 clocks (got 2 sets included) and new cobra immobilizer cat 1 fitted.
The front suspension has been rebuilt with new anti-roll bar bushes, wishbones, top mounts and bump stops and did the same for the back suspension parts also it has 40 mm new lowering springs fitted. The brakes back and front have been replaced with standard new disc/pads and shoes/drums plus new wheel bearings also got mk2 16v servo and master cylinder to be fitted.
The body work is in very good condition as the car has been striped and dipped before i bought it and the only bad bits starting to show is so rust around the windscreen. I have got a different wing and front new front panel as the front panel has got a few dents and the cut the wing off short to match it
The engine is a standard 8 valve dx code with k-jet and has been run about 2 months ago for about 1 minute.
I have shot blasted and painted alot of parts to go on this car as you can see by the pics.
Interior is in very good condition the only prob being the carpet has seen better days and there is a fag burn in passenger seat (i think could be drivers).
Now what need doing to finish it off is some of the paintwork needs sorting, new hood (the one on there does not leak but is show its age), radiator and few water pipes and relay no 17 to put it back to standard.
Also included is the engine, gearbox and engine loom from corrado 16 valve kr engine, the only parts needed to complete is the exhaust and different gearbox mount to use the kr gearbox. this is a good engine as it is from my own corrado, cambelt done and fully serviced.
this is agood conversion to do very easy and makes the car very quick (kr engine produces 136 bhp)
Bits missing from the pictures i have also things like cross hair head lights, grille (single light) new seals etc.
This would have to be taken away on a trailer , so no tax (on sorn) or mot, i dont have any past history only the things i have spent on it. this is located in somerset.


Looking for around the £1200 but am open to sensible offer. Any questions please ask
you can get in touch via pm , email or phone/text 07752418469, cheers and thanks for looking
0 guests and 0 members have just viewed this: None.