underseal? can anyone help?

im in the process of removeing all the underseal off the underside of my car, including the factory stuff. but im unsure of the best stuff to use to re seal it. im thinking bout zinc spraying it first, then sealing it. but what is the best sealant available? i would prefer paint on stuff as i dont have access to a compressor. any advise would be grateful.  

Frost http://www.frost.co.uk/productList.asp?catID=28&frostCat=Rust&subcatID=37&frostSubCat=POR-15

Have a look at the web site por15 is very good . Me i always use a good zinc primer followed by 3 coats of black Shultz underseal . Depends what finish you want ?

 

Hi, as Chudd posted i used "Zinc 182 "you can spray or paint on found ebay to be cheapest, then follow with "shultz" again ebay is your best option.

excellent, ill be buying some zinc 182 shortly. as for shultz, is it possible to paint it on by brush rather than spray? as i dont have access to a compressor, and dont have the money to buy one? cheers chaps.

Schultz is sprayed , but next best under seal is Finnegans Waxoyl underseal black . You could zinc 182 then brush the above on , after a while it drys but stays soft and protects for years .

in 96 when doing mechanics apprentiship we used both spray on and paint on, try these tey mention paint on schultz underseal on search:

www.classiccarpaints.com
tel no'  01516522302

Paul

Hi ,yes buy the 1 ltr can just pour into container and brush ,on a good warm day takes about 2 hours to dry depending on thickness.Look on ebay its made by Tetra .