Door card help

Hi guys, abit stuck with fitting my door cards at the moment and wondered if any of you guys could give me any ideas or anything to help.. Right, long story cut short.. The previous owner had drilled the door card clip holes in the door out a bigger to fit bolts in to secure a carbon fibre set in. My problem is now the holes are too big for the clips on the back of the cards to secure them on (they just fall off) Is there anywhere that does bigger clips? I didn't really want to weld the holes up and re-drill. Is there anything I can do to secure them properly? 




   Thanks guys! 




    James  

how big are the holes? later mk2s have sill strips which use a rubber grommet in the hole, then the clips pop into it. might help?

Try this website, lots of clips, and fixings for different vehicles so you might find something to suit.

Trim Pad Clips | Classic Car Parts

Dan