car dont go

i have just rebuilt my engine to the best i can and it turns over fine but just wont fire up . theres a strong spark , plent of fuel getting in there and theres compression so why the heck is it not going can any one help or got any ideas :cry:  :cry:

please help

I'd double and triple check cam timing, compression and ingition timing.  It is possible to get ignition timing 180 degs out  8O

Let us know hoe you get on

Cheers

Rich

I am having ecactly the same problem! Timing is good though! But know firing- any ideas?

If you have fuel and a strong spark then the only thing that can be is in theory the timing.

Dont get caught our by the dots on the cam pully as some have a mark which is 180 degrees out.

 I suggest a comeplete timing check. Make sure the enignes on TDC, the disi rotor arm is lined up with the disi mark, and the cam is on the correct dot.

We spent a few hours after fitting a vernier pulley towing a car up and down the road and it wouldn;t start then realised it had two dots - one of which was 180 degrees out - guess which one we had timed up on