Webber carb
Posted
#735153
(In Topic #88426)
Newbie
Webber carb
Just got a webber for my clipper 1.8 and need to get some jets would anyone know sizes.
Posted
Settled In
Hi, I run a 1.8 Clipper (EX engine) with a webber 32/34 DMTL.
I found the jet sizes on some website and it runs OK with these:-
Primary: Main 120. Air Correction 145. Tube F30. Idle 55. Acc pump 45.
Secondary: Main 140. Air Coprrection 200. Tube F33. Idle 50.
The air correctors are at the top. Main jets at the bottom of the tubes.
The primary set-up is on the same side as the throttle linkage.
Hope this helps. Keep smiling. J
I found the jet sizes on some website and it runs OK with these:-
Primary: Main 120. Air Correction 145. Tube F30. Idle 55. Acc pump 45.
Secondary: Main 140. Air Coprrection 200. Tube F33. Idle 50.
The air correctors are at the top. Main jets at the bottom of the tubes.
The primary set-up is on the same side as the throttle linkage.
Hope this helps. Keep smiling. J
Beetle restoration. Cabrio GTi (black and shiny). Golf driver.
16v MK2. (Oak green) Now on a Clipper (to keep). Audi A8 4.2 Quattro sport and a BMW R65 bike.
16v MK2. (Oak green) Now on a Clipper (to keep). Audi A8 4.2 Quattro sport and a BMW R65 bike.
Posted
Settled In
SH... Got it wrong, secondary set up is on the same side as the throttle. Sorry about that. Might be a bit rich on low throttle ! J
Beetle restoration. Cabrio GTi (black and shiny). Golf driver.
16v MK2. (Oak green) Now on a Clipper (to keep). Audi A8 4.2 Quattro sport and a BMW R65 bike.
16v MK2. (Oak green) Now on a Clipper (to keep). Audi A8 4.2 Quattro sport and a BMW R65 bike.
0 guests and 0 members have just viewed this: None.