Rocker cover studs

   
Where oh where can i get some new 1s, cant find any
     

seriously!! EBAY you can get Nice shiny ones too with nuts

If you buy the new style rubber gasket it comes with a complete set of conversions studs !!

yea i bought the 1s from ebay bloke said there for the 1.8 carb and they dont fit, far to short..
rubber gaket ? is there much diff to the cork 1s,
Thanks tho guys

if your using a cork one, then the ones you have should be fine, if your using a rubber gasket its alot thicker so you need to change the studs

you can get the rubber gasket and studs as a pack new from VW, think i paid about £25 though

Think a few on here use a mk2 one

Cheers

Rich

Some of the aftermarket studs also have a hex allen key hole in them, makes stud extraction easier. But they don't have the retaining collar so ensure you use some loctite and measure things correctly.

Yea cheers guys, cant use the old 1s because the old owner must have used a lump hammer to tighten them up, they were f**ked… my get the plastic 1, give it a try

Two nuts locked onto the stud and then use an impact driver to loosen them :-)

na, all the threads were shot, got them out now just having a ball ach to find proper new 1s

026198025c is the part no. for the rubber gasket for the rocker cover and it was about £16 when i brought it a few months back.

Cheers andy, wheres that from ??

dano999 said

Cheers andy, wheres that from ??

From vw dealers dude.

sound, Thanks for that

you could just use m6 bolts instead

Cheers john, got them from the main dealers in the end

andy77 said

026198025c is the part no. for the rubber gasket for the rocker cover and it was about £16 when i brought it a few months back.

Just called VW, this kit is now obsolete. The studs (N 101 863 01 @ 16p each +VAT) are still available to order - which is just as well as most of the aftermarket rubber gaskets don't come with them.

Also thanks to our own Rubjonny for posting those part numbers on another forum!

He's a good lad is Jonny