cabby ignition problem

ok had an ignition problem for a while now.  
 
my cabby currently doesnt start. there is no spark coming from the coil.
however the coil has been replaced twice now. the rotar arm and dizzy cap and also the control module have been changed. is there anything else that anyone could think of that it may be?

wiring?

the car turns over but doesn't start

any help would be great thanks.

long shot but have you checked your earth strap a fault with this can cause all kinds off problems

Have you checked the obvious stuff with a multimeter?

afraid i don't have a multimeter at the moment. but i will try and borrow a friends. i have gone and sourced a second hand inginition loom as well.. wiring is a bit of a mess form previous owners custom wiring jobs.

what sort of figures hould i get with a multi meter?

+12V on the main terminal on the coil; and follow the test procedure in Haynes for the hall sensor and TCI unit.

i had a similar problem with mine when i got it and it turned out to be a worn earth strap on the engine is only reason i ask

thanks will try have a look tomorow in the light. may well be. still open to any suggestions people think it could be..

checked everything with the multimeter and fitted a new hall sender but still nothing?? any one got a clue…

had new hall sender, loom, ignition control module, dizzy cap and rotar arm and coil has been replaced? running oout of parts to replace :/

I could name the few other parts of the ignition system and you go check them, but I can't see the point. It sounds like you've looked but not seen the problem, maybe its best seeking a 2nd opinion (getting on for 2 months now?), as in someone who can physically look at the car, not over the internet.