1588 EM code dizzy

can anyone show me where number 1.2.3.4 cylinder is on the 1588 block and on the distributor cap? i had the distributor outa the engine and cranked it not thinkin so i need to make sure i install it correctly again

never  mind

No1 is next to cam belt. As a 'quick' fix, try removing the plugs and cap. Put a thin screw driver down No1 plug hole and manually turn the engine over until the screw driver comes to TDC, check your rotor posn and this is where No1 lead should go.  As I say this is only a quick method and won't take into account if you're 180 out but that won't make too much difference.