Looking for copper washers for K-Jet system.

As per title.
I had my fuel lines of a few times when trying to get my car running after it had been sitting in a garage for 8 years. I have just had to replace my 5th injector and I really had to tighten up the banjo to stop it leaking. I did buy a box of various copper washers from Halfords last year but they need filing down before fitting to remove the burghs from being pressed out.
Is there a good quality set of copper washers I can buy for the K-Jet? I haven't been able to find any as yet!
Thanks.

That is a very good question, I am going to strip and clean out my metering head after a lengthy stay in the garage resulting in poor running at lower revs. We use Wurth sealing washers at work some coper and some aluminium and they do a good variety of sizes. Do you know the size of the washers and I'll have a look.


Sent from my iPhone using Tapatalk

Vw still do..
Bosch K-Jetronic can supply also.
Or I could measure set of new I've got hidden away

Kenneth Cartwright said

Vw still do..
Bosch K-Jetronic can supply also.
Or I could measure set of new I've got hidden away

The measurements would be greatly appreciated as that means I can pinch them from work if we have the right size lol
Plus the link seems to want to take me to a list of second hand car traders ? Probably as I'm using my phone. Any hoo, the measurements would be grate.
Many thanks sir


Sent from my iPhone using Tapatalk

Really ? The link should be kmi uk. Any how if remember to search out said little box I will measure… I do recall m8 m10 m12  x1.5mm but could be for something else.
Kmi in the UK refurb the k jet systems….and supply parts and hoses. So good link to have.

I replaced all mine recently pop to vw dealership they will look it up and get you the correct ones weren’t too exspensive either


Sent from my iPad using Tapatalk

Kenneth Cartwright said

Really ? The link should be kmi uk. Any how if remember to search out said little box I will measure… I do recall m8 m10 m12  x1.5mm but could be for something else.
Kmi in the UK refurb the k jet systems….and supply parts and hoses. So good link to have.

You're a scholar and a gentleman sir


Sent from my iPhone using Tapatalk

Thanks for the help guys, I'll check out the VW dealer first.

From kmi…done as set.

Thanks Kenneth, were thay expensive? I like the thought of havig shiny new bonjo bolts as well!

Kenneth Cartwright said

From kmi…done as set.

Dude you are a legend ! thanks for putting up the numbers, I will be pillaging the stores at work first thing in the morning.
 

Saulty said

Thanks Kenneth, were thay expensive? I like the thought of havig shiny new bonjo bolts as well!

off top of my head but think new hoses .. banjo bolts and washer was 160.. it's 2yrs since fitted hoses and i bought the spares for my other project..just not fitted as of yet..wait until next injection issue.