Coolant fan and switch wiring 1988 caddy
Posted
#1674849
(In Topic #242977)
Old Timer
Hi folks, I’ve recently acquired a new project , and need a little help with the wires to the coolant fan as they are missing , except two thick wires from the loom.
i believe the said two wires go to the rad temp switch in the bottom of the rad , to trigger / feed the fan, and from there to the cooling fan… is this correct? And if so how are they routed? I’ve tested the fan and it works, and I’ve identified the positive and earth (it’s a single speed fan)
cheers.
i believe the said two wires go to the rad temp switch in the bottom of the rad , to trigger / feed the fan, and from there to the cooling fan… is this correct? And if so how are they routed? I’ve tested the fan and it works, and I’ve identified the positive and earth (it’s a single speed fan)
cheers.
Posted
Local Hero
easiest way
single speed fan
two speed fan
single speed fan
two speed fan
What do Divorces, Great Coffee, and Car Electrics all have in common?
They all start with GOOD Grounds.
Where are my DIY Links?
They all start with GOOD Grounds.
Where are my DIY Links?
Posted
Old Timer
Thanks man 👍🏽
0 guests and 0 members have just viewed this: None.