Brake servo blanking plugs

Hi,  i been told that both gsf and euro car parts sell plugs to blank off the ports on 22mm master cylinder.  Ive tried them both and both say no?  Would someone out there have a part number i can use.  
They also say they dont sell bleed nipples either which was my second option. Id much rather use the plugs though.
Can someone help please.
Thanks

Sent from my SM-G920F using Tapatalk

You could use hex or allen bolts and some good Yellow Gas Pipe Teflon Tape, Just be sure that the bolts are barely long enough, and for good measure a washer on them that you slather both sides with Good Brand of RTV Permatex Black Ultra.  

They make them,
https://www.pacificcustoms.com/ac611010plug.html
I don't know the size that you are looking for.


There are more ways to skin a canary..Just depends on how much meat you want left.

Briano1234 said

You could use hex or allen bolts and some good Yellow Gas Pipe Teflon Tape, Just be sure that the bolts are barely long enough, and for good measure a washer on them that you slather both sides with Good Brand of RTV Permatex Black Ultra.  

They make them,
https://www.pacificcustoms.com/ac611010plug.html
I don't know the size that you are looking for.


There are more ways to skin a canary..Just depends on how much meat you want left.

Im in my garage as we speak looking at a few bolt options.  This has obviously been done tons of times.  Cheers

Sent from my SM-G920F using Tapatalk

they are m10x1 same as the pressure plate to crank bolts, although I would just use the proper plugs as they are tapered at the bottom. think I have some in a master cylinder somewhere

sporttrucker said

they are m10x1 same as the pressure plate to crank bolts, although I would just use the proper plugs as they are tapered at the bottom. think I have some in a master cylinder somewhere

Yes please!  If you could send them i'll pay you via paypal.  Much appreciated.

  Dont suppose you have a reservoir for 22mm master cylinder also??

Sent from my SM-G920F using Tapatalk

https://www.vwheritage.com/214611225-brake-master-cylinder-blanking-plug-m10x1-vw-spare

I think these are what you're after, couldn't remember where I had seen them.

I should have a reservoir too, will dig them out today

sporttrucker said

I should have a reservoir too, will dig them out today

Great,  let me know what you want for both and i'll send you payment.
Mucho thanks

Sent from my SM-G920F using Tapatalk

Theo/clipper said

sporttrucker said

I should have a reservoir too, will dig them out today

Great,  let me know what you want for both and i'll send you payment.
Mucho thanks

Sent from my SM-G920F using Tapatalk

Thanks to you all,  cant wait to finally get proper brakes!!

Sent from my SM-G920F using Tapatalk

found the reservoir and 3 plugs but got to get them out of the master cylinder, how many do you need?  

sporttrucker said

found the reservoir and 3 plugs but got to get them out of the master cylinder, how many do you need?  

I need two plugs thanks

Sent from my SM-G920F using Tapatalk

Theo/clipper said

sporttrucker said

found the reservoir and 3 plugs but got to get them out of the master cylinder, how many do you need?  

I need two plugs thanks

Sent from my SM-G920F using Tapatalk

Hiya mate,  how's it going with the plugs?   Hope its not proving to be a pain

Sent from my SM-G920F using Tapatalk

got them

sporttrucker said

got them

Aww great, thanks.
How much do you want?
I can pay you through paypal so send me you email


Sent from my SM-G920F using Tapatalk

Theo/clipper said

sporttrucker said

got them

Aww great, thanks.
How much do you want?
I can pay you through paypal so send me you email


Sent from my SM-G920F using Tapatalk

Hi,  could you let me know when its been posted and when its estimated to arrive.
Kind regards Theo

Sent from my SM-G920F using Tapatalk

Theo/clipper said

Theo/clipper said

sporttrucker said

got them

Aww great, thanks.
How much do you want?
I can pay you through paypal so send me you email


Sent from my SM-G920F using Tapatalk

Hi,  could you let me know when its been posted and when its estimated to arrive.
Kind regards Theo

Sent from my SM-G920F using Tapatalk

Hi mate,   haven't heard back from you regarding the parts yet.  Not sure if your aware but PayPal payment has cleared.  When do think the parts will be posted?
Cheers

Sent from my SM-G920F using Tapatalk

Theo/clipper said

Theo/clipper said

Theo/clipper said

sporttrucker said

got them

Aww great, thanks.
How much do you want?
I can pay you through paypal so send me you email


Sent from my SM-G920F using Tapatalk

Hi,  could you let me know when its been posted and when its estimated to arrive.
Kind regards Theo

Sent from my SM-G920F using Tapatalk

Hi mate,   haven't heard back from you regarding the parts yet.  Not sure if your aware but PayPal payment has cleared.  When do think the parts will be posted?
Cheers

Sent from my SM-G920F using Tapatalk

Items recived, many thanks

Sent from my SM-G920F using Tapatalk