thats torn it now with pics
Posted
#790142
(In Topic #94970)
Local Hero
thats torn it now with pics
just dropped her to work in the van and on the way i lost power then noticed the bottom pulley flying through the air :cry: :cry:
well guess thats the valves bent :cry: :cry:
cabby time
well guess thats the valves bent :cry: :cry:
cabby time
Posted
Local Hero
ouch. new engine time it's so much easier than new valves and all the boring lapping them in with a swisal stick (always sounds like a sweet to me "willy wonkers swisal stick")
good luck with it.
good luck with it.
Posted
Local Hero
2nd hand engine is about ?800 :cry:
ill get a new pulley and bolt and try it see how noisy the valves are before i strip it :wink:
just spent over ?200 on a diesel pump
ill get a new pulley and bolt and try it see how noisy the valves are before i strip it :wink:
just spent over ?200 on a diesel pump
Posted
Local Hero
even worse it's a diesel. you might straighten them but the guides maybe bent aswell. fingers crossed for you that it's ok you might be lucky
Posted
Old Timer
Never rains only pours!! let me know how it goes as I may be able to get you a lump at a reasonable price
Speeding is like masturbation, everyone does it ,but it's not something you should record and put on the internet!!
Posted
Settled In
That sucks fella Like collo said… never rains n all that
Hope you get it sorted
At least the cabbys gonna get some lovin and use lol 8)
Hope you get it sorted
At least the cabbys gonna get some lovin and use lol 8)
N17K CP
Posted
Local Hero
looks like the engine is scrap the bolt has sheared inside the crank looking at it
not sure its worths doing anything with
got the cabby booked in for an mot at 2:30 this afternoon so best i go and do a few odds and sods to that
collo how much for a tdi lump its a ABL code
on a brighter note the suns out :wink:
not sure its worths doing anything with
got the cabby booked in for an mot at 2:30 this afternoon so best i go and do a few odds and sods to that
collo how much for a tdi lump its a ABL code
on a brighter note the suns out :wink:
Posted
Settled In
The sun being out is a decoy! It makes you think i could be warm, but really its absoulutely freezing still! :roll:
N17K CP
Posted
Old Timer
Blimey,I have spent the best part of the day calling mates,contacts and general no-gooders, and I cannot find a half decent motor anywhere plenty of "I will let you know" and a few "yeah got one but its done around 250K !",sorry mate will keep looking though ops: ops:
Speeding is like masturbation, everyone does it ,but it's not something you should record and put on the internet!!
Posted
Local Hero
cheers collo ive had a similar response
may be cheaper to drop a 20v in it
may be cheaper to drop a 20v in it
Posted
Old Timer
ive just bought a transporter t4 that has been run on biodiesel all its life and it wouldnt run, found out that it had a bad mix of bio in it, drained it put fresh derv in it, and a little electric lift pump and hey presto off she goes, it does need a new diesel pump as the lift pump has gone it it, and i cant find one anywhere, is your van a 1.9 or a 2.5 ben? it shoud be a 1.9 with an ABL in it cus its the same as mine!! where did you get your pump from ben? paid 500 quid for the van!!BARGAIN!! the yamaha trike is in the back now ready for the snow tomorrow!!!
Mk1 Jetta (Jessie) build thread here
View topic: Jessie the mk1 jetta (pd conversion) lots of pics!! - The Mk1 Golf Owners Club
T25 westfalia camper, 2.2 Subaru powered
vw touran 1.9 tdi remap, Bbs rep wheels , lowered, bla bla bla……… Wife's car
2013 Vw amarok 2.0bitdi, work truck……. www.jsgarageaberystwyth.co.uk
View topic: Jessie the mk1 jetta (pd conversion) lots of pics!! - The Mk1 Golf Owners Club
T25 westfalia camper, 2.2 Subaru powered
vw touran 1.9 tdi remap, Bbs rep wheels , lowered, bla bla bla……… Wife's car
2013 Vw amarok 2.0bitdi, work truck……. www.jsgarageaberystwyth.co.uk
Posted
Local Hero
always look on the bright side of life
would that be a 1.9 tdi lump?
would that be a 1.9 tdi lump?
Posted
Old Timer
ye it is wooders
Mk1 Jetta (Jessie) build thread here
View topic: Jessie the mk1 jetta (pd conversion) lots of pics!! - The Mk1 Golf Owners Club
T25 westfalia camper, 2.2 Subaru powered
vw touran 1.9 tdi remap, Bbs rep wheels , lowered, bla bla bla……… Wife's car
2013 Vw amarok 2.0bitdi, work truck……. www.jsgarageaberystwyth.co.uk
View topic: Jessie the mk1 jetta (pd conversion) lots of pics!! - The Mk1 Golf Owners Club
T25 westfalia camper, 2.2 Subaru powered
vw touran 1.9 tdi remap, Bbs rep wheels , lowered, bla bla bla……… Wife's car
2013 Vw amarok 2.0bitdi, work truck……. www.jsgarageaberystwyth.co.uk
Posted
Local Hero
pretty sure neil's got a low mileage one of them. want his number?
Posted
Local Hero
going to try and get the sheared bolt out later my pump was rebuild by power drive in portsmouth jamie ill get u the number
Posted
Local Hero
ive been told the early mk3s had the ABL lump in them so just need to find one now
jamie your a wealth of knowledge :wink:
jamie your a wealth of knowledge :wink:
Posted
Local Hero
pics for you to laugh at
how am i going to get this broken bolt out
how am i going to get this broken bolt out
Posted
Old Timer
could you not try welding a bolt to it or even sacrifice a socket and weld directly onto it?
Posted
Local Hero
bigdave said
could you not try welding a bolt to it or even sacrifice a socket and weld directly onto it?
What for? The pulley came off on its own, the main issue now is the piston/valve damage!!!
Posted
Local Hero
i thought about welding somthing on there but im not sure ill get the gun in close enough also the bolts right in the crank so dont want to melt the oil seal
i thinking along the lines of drilling it enough to whack somthing like a torque drive in the there
opinions welcome lol
i thinking along the lines of drilling it enough to whack somthing like a torque drive in the there
opinions welcome lol
0 guests and 0 members have just viewed this: None.