MK1 CLIPPER SPEEDO CABLE DRIVE FITTING
Posted
#1626915
(In Topic #223231)
![Avatar](https://vwgolfmk1.org.uk/themes/default/images/ocf_default_avatars/default_set/berries.png)
Settled In
![dengeo45 in the usergroup ‘Local’ dengeo45 in the usergroup ‘Local’](https://vwgolfmk1.org.uk/themes/default/images_custom/ylV8bhM.png)
I'm fitting a new speedo cable and having a problem fitting the red plastic drive cog onto the end of the cable. I also bought a replacement circlip to fit into the groove at the end of the cable fitting, but having done that, the cable will no longer enter the drive cog - that is, the circlip is preventing me pushing it fully home into the cog.
I am obviously doing something wrong here and would be grateful for advice before I bodge things up! I know that the gap in the circlip needs to be at 180 degrees from the hole in the side of the cog.
Never thought this would be a problem, but there you are !!
Any advice would be greatly appreciated.
den
Posted
![Avatar](https://vwgolfmk1.org.uk/themes/default/images/ocf_default_avatars/default_set/berries.png)
Settled In
![dengeo45 in the usergroup ‘Local’ dengeo45 in the usergroup ‘Local’](https://vwgolfmk1.org.uk/themes/default/images_custom/ylV8bhM.png)
0 guests and 0 members have just viewed this: None.