whining bearing noise when reving the car 1.8 gti,
Posted
#1550100
(In Topic #207645)
Settling In
Posted
Old Timer
whining bearing noise when reving the car 1.8 gti,
Sent from my iPhone using Tapatalk
Posted
Local Hero
How about the cambelt idler or an associated part? Or something as daft as the cam belt cover rubbing on the belt. You should be changing the belt anyway if its been stood idle that long.
Posted
Settling In
Backinblack said
Trust bearing does it disappear when revving with the clutch down?
Sent from my iPhone using Tapatalk
Posted
Settling In
Posted
Settling In
Yomp said
If its from the front it wont be oil pump as that sits underneath the dizzy.
How about the cambelt idler or an associated part? Or something as daft as the cam belt cover rubbing on the belt. You should be changing the belt anyway if its been stood idle that long.
Yomp said
If its from the front it wont be oil pump as that sits underneath the dizzy.
How about the cambelt idler or an associated part? Or something as daft as the cam belt cover rubbing on the belt. You should be changing the belt anyway if its been stood idle that long.
Posted
Settling In
Posted
Old Timer
i pressed the little red button
Posted
Newbie
did you ever obtain a solution to this problem? My car is doing the same thing. 1.8 1983.nigelmc99 said
yes I replaced the cam belt and idler before the engine went back into the car , the whining noise comes in when the car heats up after running for about 5-10 mins, I removed the top cam belt cover to check for any rubbing , all was clear, I removed the fan belt to rule out that the alternator and water pump where ok , when I rev the car it sounds ok no whining , then when the revs die off the bearing whin noise comes in at the end , any ideas !!!
0 guests and 0 members have just viewed this: None.