what have done wrong??
Posted
#1207155
(In Topic #144277)
Settling In
![Elroy in the usergroup ‘Regular’ Elroy in the usergroup ‘Regular’](https://vwgolfmk1.org.uk/themes/default/images_custom/m4O9bNA.png)
what have done wrong??
I filled the system, using a gunson easybleed kit. Used 1 litre of synthentic dot 4, ran through all air out of lines. So what have i done wrong?? It really has cheesed me off, I've spent a f@cking fortune, not including my soon to go in 20v, ko3s etc etc!
The only thing i can think of is, that i kept on the 9" clevis, but only because it had the hole there for spring, but i trimmed off 10mm from the 9" piston rod thread.
cheers boys.
Posted
Local Hero
![paul_c in the usergroup ‘Local hero’ paul_c in the usergroup ‘Local hero’](https://vwgolfmk1.org.uk/themes/default/images_custom/2T6Iw1M8.png)
I'd personally not use an Easibleed kit for the rears on a Mk1 Golf. They have either a presure reducer or a load compensating valve. Brake pressures are in the region of 2000psi. The valve greatly reduces this. So I don't think the 30psi or so of your spare tyre is going to worry it too much. Do it the old fashioned way, with a 1 way valve on the bleed nipple, and you should be okay. If its a new MC then pumping the pedal will be a non issue if done slowly.
Posted
Old Timer
![chipster2407 in the usergroup ‘Old timer’ chipster2407 in the usergroup ‘Old timer’](https://vwgolfmk1.org.uk/themes/default/images_custom/XW2jYK6.png)
Posted
![Avatar](https://vwgolfmk1.org.uk/uploads/ocf_avatars/IMG_0038.jpg)
Website Manager
![lhasadreams in the usergroup ‘Moderators’ lhasadreams in the usergroup ‘Moderators’](https://vwgolfmk1.org.uk/themes/default/images_custom/OeIGBY0.png)
![lhasadreams in the usergroup ‘Paid Member’ lhasadreams in the usergroup ‘Paid Member’](https://vwgolfmk1.org.uk/themes/default/images_custom/7vW13sh.png)
![lhasadreams in the usergroup ‘Regional Hosts’ lhasadreams in the usergroup ‘Regional Hosts’](https://vwgolfmk1.org.uk/themes/default/images_custom/MkOEmwK.png)
![lhasadreams in the usergroup ‘Administrators’ lhasadreams in the usergroup ‘Administrators’](https://vwgolfmk1.org.uk/themes/default/images_custom/3KoSCEK.png)
Like Paul said, is the operating rod actually pushing te master cylinder via the servo ? What gap did you set between the rod and the aster cylinder ?
Are your rear shoes adjusted to be close to the drums ?
Posted
Settled In
![mk1gtc in the usergroup ‘Local’ mk1gtc in the usergroup ‘Local’](https://vwgolfmk1.org.uk/themes/default/images_custom/ylV8bhM.png)
0 guests and 0 members have just viewed this: None.