Oil pressure
Posted
#1180874
(In Topic #141108)
Settling In
Oil pressure
Posted
MOTY 2013
Hello my name is John and I'm a dub addict.
My wiring diagrams and other documents have moved here:
VAG Documents & Downloads
You'll need to sign into google/gmail for the link to work! (its free!)
My wiring diagrams and other documents have moved here:
VAG Documents & Downloads
You'll need to sign into google/gmail for the link to work! (its free!)
Posted
Settling In
It will hardly look like it's registering?? Is this right?
Posted
MOTY 2013
Hello my name is John and I'm a dub addict.
My wiring diagrams and other documents have moved here:
VAG Documents & Downloads
You'll need to sign into google/gmail for the link to work! (its free!)
My wiring diagrams and other documents have moved here:
VAG Documents & Downloads
You'll need to sign into google/gmail for the link to work! (its free!)
Posted
Settling In
Hmmm, my a I should look around for a 5 bar one?
Posted
Posted
Local Hero
Posted
Settling In
So, does your run at 1 bar when warm too?
Posted
Local Hero
Posted
Settling In
Posted
MOTY 2013
vw specifiy both 5 and 10bar gauges for the mk1 if you care that much for originality
if the sender is in the head the pressure readings are a little lower than at the filter housing, the minimum pressure spec at the head is 0.3bar which would be hard to read on a 1-10bar gauge. theres no reason why you cant put the pressure sender in the filter housing and swap it for the mfa oil temp sender. that'll be just like a mk2 16v sender arrangement. just a case of extend your wiring to reach.
I have the same problem with my audi oil temp gauge its 0-180degrees so it hardly comes off the stop! operating temp is something like 4mm away from 0.
Hello my name is John and I'm a dub addict.
My wiring diagrams and other documents have moved here:
VAG Documents & Downloads
You'll need to sign into google/gmail for the link to work! (its free!)
My wiring diagrams and other documents have moved here:
VAG Documents & Downloads
You'll need to sign into google/gmail for the link to work! (its free!)
Posted
Settling In
Just out of interest, I found this useful article which explains not only the fitting of the dials but also what the oil pressure gauge should read.
Posted
MOTY 2013
proper mk1 vdos look different though they have needles that look the same as the mk1 clocks in case you were wondering
edit: like this, though iirc the needles are white?
http://www.ebay.co.uk/itm/VW-Golf-MK1-MK2-GTI-Porsche-VDO-Water-OilTemperature-Gauge-Celsius-Very-Rare-/320854742946
Hello my name is John and I'm a dub addict.
My wiring diagrams and other documents have moved here:
VAG Documents & Downloads
You'll need to sign into google/gmail for the link to work! (its free!)
My wiring diagrams and other documents have moved here:
VAG Documents & Downloads
You'll need to sign into google/gmail for the link to work! (its free!)
Posted
Settling In
Posted
MOTY 2013
Hello my name is John and I'm a dub addict.
My wiring diagrams and other documents have moved here:
VAG Documents & Downloads
You'll need to sign into google/gmail for the link to work! (its free!)
My wiring diagrams and other documents have moved here:
VAG Documents & Downloads
You'll need to sign into google/gmail for the link to work! (its free!)
Posted
Settling In
So, I have decided to have a crack with the sender on the oil housing. As the warning part of the sender is 0.5bar this will mean the oil warning lamp will light up at 0.5bar rather than 1.8 bar on the original, right?
Posted
MOTY 2013
take the mfa oil sender out of the filter housing and put your vdo pressure sender there. extend the wire from the side of the head to the filter housing, and put your mfa sender in the side of the head
Hello my name is John and I'm a dub addict.
My wiring diagrams and other documents have moved here:
VAG Documents & Downloads
You'll need to sign into google/gmail for the link to work! (its free!)
My wiring diagrams and other documents have moved here:
VAG Documents & Downloads
You'll need to sign into google/gmail for the link to work! (its free!)
Posted
Settling In
Posted
MOTY 2013
Hello my name is John and I'm a dub addict.
My wiring diagrams and other documents have moved here:
VAG Documents & Downloads
You'll need to sign into google/gmail for the link to work! (its free!)
My wiring diagrams and other documents have moved here:
VAG Documents & Downloads
You'll need to sign into google/gmail for the link to work! (its free!)
0 guests and 0 members have just viewed this: None.