Cutting out helllllp

Ah thanks nah it doesn’t do it when brake torquing, and the idle doesn’t change when stationary and hard braking


Sent from my iPhone using Tapatalk

Does it stall straight away, as soon as you press the brake?

The revs gradually go down like normal then just drop out


Sent from my iPhone using Tapatalk

Do you know if you have a lift pump in the tank?

Yes I do mate I have replaced it with a new one the old 1 was perished away and corroded


Sent from my iPhone using Tapatalk

Have you checked for power and ground, can you hear the pump working?

I can hear the pump working, the pipe which leads from pump to accumulator is perished so I have taken it off to replace again, I’m hoping that was sucking a little bit of air in which could cause my problem, can any of u guys tell me what 36a is in my picture and what the part number is

It has a little valve in it and I’m not sure why


Sent from my iPhone using Tapatalk

It's a non-return valve (check-valve) only allowing gas to leave the pump and not return to it by drain back.

Thanks, that was quite loose when I took the pipe off could I just use a banjo bolt to go through the pipe or does it need that non return valve


Sent from my iPhone using Tapatalk

Don't remember as it has been years/ decades since I touched a CIS Fueling system…

Ah ok not to worry I will leave it on there best not to mess around with it lol


Sent from my iPhone using Tapatalk