Skip navigation

my latest project

Post

Back to the top
After selling my campaign project i instantly regretted it and needed another tintop project . ( as my campaign project is no more decided i would over write my new project on the old campaign project pages) So i bought another mk1 as it was only 30 miles from me. Arrived with many parts missing,  more than i actually realised, for instance no accelerator pedal. I found one on ebay and here it is brought back to shiny metal awaiting its repaint..
DSCF2437.JPG
 

Last edit: by abfmk1

Post

Back to the top
PAINTED
DSCF2438.JPG

Last edit: by abfmk1

Post

Back to the top
DSCF2251.JPG DSCF2250.JPG DSCF2249.JPG

Last edit: by abfmk1

Post

Back to the top
DSCF2254.JPG DSCF2253.JPG DSCF2252.JPG

Last edit: by abfmk1

Post

Back to the top
DSCF2257.JPG DSCF2256.JPG DSCF2255.JPG

Last edit: by abfmk1

Post

Back to the top
DSC_0089_1.jpg

Last edit: by abfmk1

Post

Back to the top
 Nice painted wishbones, with new ball joints and rubbers, and a nice rust free pair of rear w/bone mounts with new clamps ,  and new stainless wishbone/ antiroll bar mounts
DSCF2258.JPG

Last edit: by abfmk1

Post

Back to the top
Painted up original strut housings, new/unused febi top mounts and new/unused bilstien b4 inserts.
DSCF2259.JPG

Last edit: by abfmk1

Post

Back to the top
 The unused so far,  1.8t engine and 02j gearbox conversion mounts.
DSCF2274.JPG

Last edit: by abfmk1

Post

Back to the top
Cabriolet 100 mm hub assemblies, derusted, painted and new wheel bearings inserted
DSCF2277.JPG

Last edit: by abfmk1

Post

Back to the top
New rear B4 bilsteins with new bump stops and used springs..
DSCF2298.JPG

Last edit: by abfmk1

Post

Back to the top
DSCF2301.JPG DSCF2299.JPG Used ABF flywheel with new bolts and new vr6 clutch assy to replace standard 1.8t flywheel assy. Usual recomended conversion.
DSCF2300.JPG

Last edit: by abfmk1

Post

Back to the top
Used pair of 100mm driveshafts

DSCF2302.JPG

Last edit: by abfmk1

Post

Back to the top
New unused steering rack with new unused steering arms ( i planned to put an adjustable arm on both sides ) and new unused rubber gaiters.

DSCF2303.JPG

Last edit: by abfmk1

Post

Back to the top
Modified brake cross over linkage to allow fitting of clutch master cylinder..

DSCF2317.JPG

Last edit: by abfmk1

Post

Back to the top
New/unused 16v type cambelt tensioner and new/unused epytec spacer. These are needed as original 1.8t tensioner fouls on the modified mk1 golf conversion mount, and needs removing.

DSCF2318.JPG .

Last edit: by abfmk1

Post

Back to the top
di tt exhaust manifold

Post

Back to the top
Engine / gearbox in

DSCF2336.JPG

 

Last edit: by abfmk1

Post

Back to the top
New unused intercooler,  which i will not fit at the moment.

DSCF2337.JPG

Last edit: by abfmk1

Post

Back to the top
  edit
0 guests and 0 members have just viewed this: None.