Simple seat lever question

Was going to order some new seat lever trims for my 92 cab to replace my existing broken ones when I realised I could not find any info on how to remove the actual tilt lever to fit them. I dont want to just start pulling at it without any confirmation  from anyone who has done it. If it's too risky a job and may cause damage I can certainly live with it lol
Thanks

Remove the Screw as yours is a 90ish cabby and they have the lower screw and a cover to hide the screw.

Grab the lever and pull.  Be sure that you have the clip on the inside or it may have stayed on the lever.

You can use a small flat blade and pry the thing off using the seat frame to hold the blade.

yes matey you just pull them off.... not sure if thats right style , but same applies pull it off. then remove cover.

Thanks lads