Skip navigation

Hanging exhaust system - Cabrio 16v

Post

Back to the top
Hi,

I have just fitted a new exhaust system (TA-Technics) but it hangs quite a bit just in front of the rear axel.

IMG_20191223_exhaust.jpg

There are very few exhaust hangning positions in the original exhaust system, three by the rear silencer and one singel hanger by the catalyctic converter. Have any of you added more? 

Post

Back to the top
That doesn't look right. This is mine, although a different system as it's a Powersprint. The angle coming off to the front at the manifold seems upside down.

E060D0EB-220C-45E7-BA20-9F095810BB58.jpeg

Post

Back to the top

Hanging exhaust system - Cabrio 16v

When I first fitted the exhaust system to the it looked right but after I started the engine and it ran for a while the exhaust ended up in the position in the picture.

Post

Back to the top
If it's moved that much, have you got the clamps tight enough to stop it rotating? Doing exhausts yourself is not a nice job, be so much easier on a proper ramp.
0 guests and 0 members have just viewed this: None.