Skip navigation

Sill Trim Help!?

Post

Back to the top
Hello all,

My vehicle didn't have plastic sill trims as it had an awful aftermarket kit fitted to it. I have asked the bodyshop to remove the rivet holes that aren't required anymore but I fear I may have made a mistake. 

Can anyone advise how the sill trims fix (carpet to sill) to the sill?

Thanks all.

Item '1' in the photo…

IMG_5053.PNG IMG_5053.PNG

Post

Back to the top
They just push fit mate using 2 item 2's

Post

Back to the top
Thanks Raul, that's exactly what I was hoping to hear. The 2 holes in mt sill threw me a little.

Post

Back to the top
There were 2 styles of clips used for the sill cover.

One had the finger edge to hold the carpet down
pn 155863153



And the normal sill clips
pn 155853577


There where usually 2 of the carpet clips and 4 of the other per side.

The carpet clips were fastened to the carpet and over the sill and would remain when the sill cover was removed.
Where as the sill clips were inserted in the sill and came up with the sill cover when removed.

Last edit: by Briano1234


What do Divorces, Great Coffee, and Car Electrics all have in common?

They all start with GOOD Grounds.

Where are my DIY Links?
0 guests and 0 members have just viewed this: None.