Skip navigation

Leaking Fuel Metering Unit

Post

Back to the top
Petrol is seeping from between the flush two metal surfaces of my fuel metering unit.

Any advice how to stop this would be greatly appreciated. Can I assume a gasket is leaking?

Post

Back to the top

Leaking Fuel Metering Unit

Hi, picture would be help full, is it leaking from the pipes going to injectors?

Sent from my AC2003 using Tapatalk

Post

Back to the top
If it is leaking between the upper and lower halves of the metering head then a strip down will be required. You can buy refurb kits - I got mine off ebay from this seller - https://www.ebay.co.uk/usr/missing.parts?_trksid=p2047675.l2559
Came with very detailed instructions. I'll be honest, I've not been able to test my rebuilt unit yet (it's a project car!) and I know some people have problems with rebuilding them. If you don't want to tackle it yourself there are a couple of companies that offer a rebuild service but it's not cheap.

My rebuild thread I will try and keep up to date: here

K-Jet fuel pressure test guage How-To

Post

Back to the top
these guys will rebuild/refurb. not cheap but renowned for a good job

Home Page

Post

Back to the top
Thanks for the advice everyone. Cost of a professional rebuild turns out to be £437. Think I might try a bit of wellseal in the meantime.
0 guests and 0 members have just viewed this: None.