Skip navigation

Eibach front ARB fitting

Post

Back to the top
I'm having some serious issues getting my new front Eibach ARB to line up correctly.  I managed to get the rear mounts loosely fitted, and then the driver's side onto the wishbone (on the top) using a g-clamp to guide the studs through the holes, but no matter what level I position the suspension I cannot get the passenger side wishbone mount to line up.

I cannot seem to get the suspension in any position where the ARB is in a completely neutral position, and it is always under some tension.  It's not a million miles away, but there is so little give in the new bar that I cannot manipulate it into alignment.

Please help, this is now driving me crackers and I'm out of ideas.

P.S. I got the rear ARB fitted no problem.

Post

Back to the top
Once the one side is aligned, I will tell you that the OEM can be a pain in the arrrse to get in.

IIRC I used a big steel bar stock to grab the end and get it to the position so my son could drop the bolt over in the holes…

What do Divorces, Great Coffee, and Car Electrics all have in common?

They all start with GOOD Grounds.

Where are my DIY Links?

Post

Back to the top
Cheers Briano, I persevered and with a number of different aids using g-clamps, ratchet straps & some brute force I managed to get the clamps fitted.  I've left everything hand tight and will torque it once on the ground & settled.
Probably one of the most frustrating jobs I've done, a close second being the new filler neck hose!!! 😂
0 guests and 0 members have just viewed this: None.