Sketch to help : Ignition/Switched +12V for Stereo

Read the previous posts, ran in new wiring from fuse box, might help others.



IGN OFF = RADIO OFF
IGN POSN.1 = RADIO ON / MEMORY INTACT

What part of the fuze box does the wiring come from ?

Would be good for archive if you could give exact locations

Cheers…………..

There are bare spade connectors on back of fuse box. Just remove bottom screw and lift off the fusebox, there's enough slack in the wiring to see the backplane. I found the spade clips on the left were all +12V constant, and only a few on the right were switched/ignition +12V.
Use a Multiimeter to buzz out each spade clip to see which one is switched/ignition +12V; when ignition key turned to posn.1 i.e. dashboard red LED's on.

BIG BIG thank you for posting that, been searching a while as mine seems to have lost the original stereo wiring.