Skip navigation

MFA

Post

Back to the top

MFA

i bought my campaign with the MFA wires gone. im restoring it to its original glory. can anyone email me a diagram of the MFA wiring. my emails sonic_jtec10@yahoo.com  thanks!

Post

Back to the top

.

try the arcives mfa is a  in there  a lot i just gave up on mine

Post

Back to the top
You need a Haynes manual 1983 'brown cover type' diagram in that . Complicated especially if it's all been ripped out . Expensive as most parts can only be sourced 2nd hand via Ebay etc .

Good luck with it ………

Post

Back to the top
there are 2wires from the MFA stalk switch. where will i connect the red? where will i connect the brown?

Post

Back to the top
online there are tons of mk2 MFA repair subjects. how come our mfa switch only has 2 wires? where will i connect them? is ours just a mode button? ive tried the archives, but still there is no hope for me finding the subject i need.

Post

Back to the top
From the switch, the red wire connects to a red and white wire that then connects to the clocks.

I think the other wire according to Haynes it black from the switch then connects to a brown wire. The brown wire is an earth and it connects to the engine rocker cover.

Hope this helps.

Cheers,

Ross

Post

Back to the top
got it! thanks! :)
0 guests and 0 members have just viewed this: None.