Skip navigation

ABF into mk1 stainless manifold

Post

Back to the top
Does anyone know who sells a decent 4-2-1 stainless exhaust manifold that ends in  2 1/2 inch dia and fits a rhd without touching anything. To fit the taller abf engine.

Post

Back to the top
I don't know of any SS Manifolds out there, but a G60 4-2 manifold with a dual down should, then there is the Raceland header that may work.

I will tell you two things I learned.

The Diesel Toilet Bowl manifold never broke or cracked on my 81 diesel.  

But every single 90 I have owned with the 4-1 manifold cracked , holed was generally designed by accountants that sweated every micro-ounce of cast iron, and every single grain of sand in the casting….

I guess with the g-60 they designed it while the accountants were on Holiday.

The G-60 is usually cheaper at the wreckers, than the various on-line stores….  

First one I bought was about 150.
The second one at the scrappers was 35 with the down pipe….. :)

The tt-tuning dual down was about 250 for the original. It's gone up some in price since.





What do Divorces, Great Coffee, and Car Electrics all have in common?

They all start with GOOD Grounds.

Where are my DIY Links?
0 guests and 0 members have just viewed this: None.