Knee bar fixings

Does anyone know where I can get the expanding plastic fixings that hold the knee bar in place ?

Thanks Mick.

89 Cabby?  a picture would be nice, as are you talking about the cover over the knee bar, or the whole thing.

My Knee bar cover was held in by speed nuts and Phillp's screws….

The whole knee-bar is held on by 4 nuts and 4 bolts 13mm 2 of each each side of the "a" pillar….

Apologies, its the knee bar cover, the plastic expanding plugs that attach it to the actual knee bar.

the pn in the ETKA is 161867299 01C for those.  As I stated mine were replaced using speed nuts and Phillips screws.  

Over here you can get those types of pins at "help" sections of most Good parts stores.  I have even used the Tree Push fasteners on some.

Thanks for your help, these are an absolute nightmare to fit as well, right up under the dashboard

Here you go pack of 12. Bresco highly regarded by myself, used them for years. Howard there is brilliant.

Push-in Rivet, Black. VW / Audi / BMW / Mercedes / Ford / Volvo

Thanks Chortle, that's a great help.

No probs,
I spoke to Howard there yesterday as I needed some bits myself.
One of those blokes who goes out of his way to help you.
He got me some clips that were NLA from the dealers for a few years and still supplies me today. Saved my bacon a time or 2.

I found being upside down in the passenger seat helped get those clips back in to the underside of the Knee bar cover.

Yes mate, been in that position, upside down in the footwell, torch in mouth……  worst job ever.

Yep I concur, but wait till you have to do a heater matrix lol..