Engine Swap...
Posted
#602725
(In Topic #72359)
Settling In
Engine Swap...
Cheers
_____________________________________
83 Golf GTi Campaign - Diamond Silver - Light mods
83 Golf GLi Cabbie - Mars Red - Heavy mods
83 Golf GTi Campaign - Diamond Silver - Light mods
83 Golf GLi Cabbie - Mars Red - Heavy mods
Posted
Old Timer
Posted
Old Timer
If you had one of these 'bubble block' engines, you'd need a collar for the dizzy and a blanking plate for the front of the engine - both sold by TSR
Cheers,
Mark
Posted
Settling In
_____________________________________
83 Golf GTi Campaign - Diamond Silver - Light mods
83 Golf GLi Cabbie - Mars Red - Heavy mods
83 Golf GTi Campaign - Diamond Silver - Light mods
83 Golf GLi Cabbie - Mars Red - Heavy mods
Posted
Old Timer
Posted
Old Timer
m6m62 said
If you had one of these 'bubble block' engines, you'd need a collar for the dizzy and a blanking plate for the front of the engine - both sold by TSR
Cheers,
Mark
I have an Audi 80 block like this (from a '93 car, 2.0E with AAD engine code), and because the block is a few mm taller than the DX block you'll also need a "sandwich" spacer plate to go between the exhaust manifold and the down-pipe, other wise you'll be straining the exhaust system and it will be knocking on the floorpan - TSR supply these, with the other parts mentioned above (that you'll also need for this block).
Posted
Old Timer
0 guests and 0 members have just viewed this: None.