project shrek
Posted
Old Timer
project shrek
Rear stub axles - (left 333501117) (right 333501118)
2x Stub axle grease guards - (191501639A)
8x Stub axle bolts - (N90758901)
RHS Caliper - (1J0615424F)
LHS Caliper - (1J0615423D)
LHS Caliper Carrier - (1H0615425)
RHS Caliper Carrier - (1H0615426)
4x Carrier bolts - (N90729401)
Pads - (1H0698451D)
Discs (plain) - 357615601
2x wheel bearing kits - (191598625)
Back plate left - (191615611D)
Back plate right - (191615612B)
Goodridge hoses - (BHOSCRCONV)
16v Scirocco Handbrake Cables.
Thats what i used on mine. Hope that helps
Steff
I saw a crinkly peanut tomorrow
Posted
Settled In
Posted
Old Timer
Got pics of my disc conversion if you need to see how anything goes, just ask
Steff
I saw a crinkly peanut tomorrow
Posted
Settling In
MissMk1 said
No probs mate, Let me know how you get on.
Got pics of my disc conversion if you need to see how anything goes, just ask
Steff
hi can you send me pic of your disc conversion it just when i do mine i can use it as a guide my email is jermaine.dawson1@googlemail.com thanks
Posted
Old Timer
marlonjd said
MissMk1 said
No probs mate, Let me know how you get on.
Got pics of my disc conversion if you need to see how anything goes, just ask
Steff
hi can you send me pic of your disc conversion it just when i do mine i can use it as a guide my email is jermaine.dawson1@googlemail.com thanks
Yeah sure, I'll upload the pics at the weekend and send them over.
Need to update my build thread anyway lol
Steff
I saw a crinkly peanut tomorrow
Posted
Settled In
Adamdancer@tiscali.co.uk
Posted
Settled In
Posted
Settled In
If you was local, i'd of had it wired up within an hour or 2. Least you have it running now, even though its taken months.
The oil pressure senders are above the oil filter mate. The water temp is on the side of the head.
Spread the wires out that you have left and take a pic. I'll try pinpoint where they go then . You should've marked where each wire went before you removed the 8v :wink:
92 caddy, Now stripped for full rebuild
83 golf gti R1 carbed 16v(soon to have 1.8T)
07 Leon FR TDI daily
Cambridgeshire regional host
83 golf gti R1 carbed 16v(soon to have 1.8T)
07 Leon FR TDI daily
Cambridgeshire regional host
Posted
Settled In
Posted
Settled In
some of the wires
Posted
Settled In
Posted
Settled In
The yelllow looks like it goes to the oil filter housing along with the Blue wire. There should be 2 oil senders above the oil filter.
92 caddy, Now stripped for full rebuild
83 golf gti R1 carbed 16v(soon to have 1.8T)
07 Leon FR TDI daily
Cambridgeshire regional host
83 golf gti R1 carbed 16v(soon to have 1.8T)
07 Leon FR TDI daily
Cambridgeshire regional host
Posted
Settled In
I'm not to sure I've found some bits on eBay and some others at gsf but in still looking for some parts so I think a trip to the scrap yard is in ordersimongolf83 said
Just a quick Q where do you get all the rear brake conversion kit from.
Posted
Settled In
As soon as I'm up the yard where the car is I will try that thanks very much will let you know as soon as I cancaddyrage said
Try the yel/red wire on 1 of the senders on the side of the head mate as thats where mine goes
The yelllow looks like it goes to the oil filter housing along with the Blue wire. There should be 2 oil senders above the oil filter.
Posted
Old Timer
I'll get some more detailed pics for you when i get the car back here this week, i've not seen it this year yet to be able to take more pics!
http://www.vwgolfmk1.org.uk/modules.php?name=Forums&file=viewtopic&t=104979&postdays=0&postorder=asc&start=15
I saw a crinkly peanut tomorrow
Posted
Settled In
Posted
Moderator
Ever growing range of new mk1 golf parts www.classic-vw.co.uk
Posted
Settled In
Posted
Moderator
Ever growing range of new mk1 golf parts www.classic-vw.co.uk
Posted
Settled In
There are too many online users to list.