mk1 resto!
Posted
Settling In
mk1 resto!
hi all sorry i havent got round to putting any pics up but i have been away for the weekend and hope fully i can restart the resto tomorrow (weather permitting)
levy
levy
Posted
Settling In
hi all,
going to be cutting out the srches tomorrow and was wondering what sort of precautions/things to look out for while doing so (i.e nothing behind the metal that i shouldnt be cutting 8O ) info very welcome
cheers
going to be cutting out the srches tomorrow and was wondering what sort of precautions/things to look out for while doing so (i.e nothing behind the metal that i shouldnt be cutting 8O ) info very welcome
cheers
Posted
Local Hero
Have you read Markwon's post on his arches? Definitely a good starting point…
There's a link (if you haven't seen it already) on the first page of this thread
There's a link (if you haven't seen it already) on the first page of this thread
Posted
Local Hero
Only cut out what needs to be removed... if you can stay away from the flat areas of rear quarter panel it will make things 100 times easier
Posted
Settling In
what is the front of the car like.
a pillars and the bottom of the front wind screen.
jukes
a pillars and the bottom of the front wind screen.
jukes
Jellybeans
Posted
Local Hero
Before you go too mad in cutting your golf about is this book on your Christmas list ?
VW Golf and Jetta Restoration Manual (Haynes Restoration Manuals): Amazon.co.uk: Porter, Lindsay: 9781859604489: Books
You realy should have this before you cut ! Its the bible for Golf owners cutting rust out
Cheers………….
VW Golf and Jetta Restoration Manual (Haynes Restoration Manuals): Amazon.co.uk: Porter, Lindsay: 9781859604489: Books
You realy should have this before you cut ! Its the bible for Golf owners cutting rust out
Cheers………….
Posted
Settling In
hi A pillars are good, the bottom of the front valance has surface rust but nothing a 4.5" disk wont get rid of
cheers
cheers
Posted
Settling In
the bottom of the windscreen is also very tidy compared to the rest of the rotton body 8O ,
cheers
marking and cutting out the arches tomorrow lol
cheers
marking and cutting out the arches tomorrow lol
Posted
Local Hero
How did you get on cutting out the arches? Got any photos?
Cheers
Cheers
1981 1600 GTI (coming to a road near you soon…)
1983 1100 C
1983 1100 C
Posted
Settling In
hi will post photos tomorrow tell me what you think ops: lol
cheers
cheers
Posted
Settling In
hi all sorry i havent posted in a while but could you tell me how on gods earth you get the arch of the inner arch :dontknow: because ive got one side done but accidentally cut into the inner arch getting it off ops: , so this time i dont fancy any unneccessary repair work,
all info appreciated
regards
all info appreciated
regards
Posted
Local Hero
what I did to remove mine (although pointless really as I needed to replace inner arches too :cry:
was to use an angle grinder and cut vertically about 2mm in from the leading edge of the outer arch.. if that makes sense?
was to use an angle grinder and cut vertically about 2mm in from the leading edge of the outer arch.. if that makes sense?
There are too many online users to list.