Lawsy family - BLUEY - project 2 tone commences....
Posted
Old Timer
Lawsy family - BLUEY - project 2 tone commences....
will look even better two tone.
ash x
Posted
Local Hero
dope_as said
rims look well nice mate.
will look even better two tone.
ash x
yeah mate - had an issue with the fronts fouling the caliper a little tho- so currently on 3mm spacers.. 8O 8O
what stance ar eyours, ET20 all round or spaced as well!!
2 tone going to start soon - need it done!!
Posted
Old Timer
they used to foul the caliper at the front, tho it turned out to be the wheel balancing weights stuck on the inside of the wheel that were catching, a little careful placement with the new ones and it was fine.
ash x
Posted
Local Hero
dope_as said
mine are et20 all round, no spacers.
they used to foul the caliper at the front, tho it turned out to be the wheel balancing weights stuck on the inside of the wheel that were catching, a little careful placement with the new ones and it was fine.
ash x
mine are proper on the caliper - might have to get the file out - 3 mm spacer clears!!
Migth need to do some scaffold pole action on the arch too!! :mrgreen: :mrgreen:
Posted
Old Timer
Nice car Steve, I don't normally go for pinstriping but that looks good on the original patched up paint. 8)
More doors FTW etc… :y:
Yradave says relax.
07792646786
07792646786
Posted
Local Hero
I had an annoying dent in the door from the one careless previous owner, and a few more scrapes around the car - also been toying with the idea of 2 tone for ages - then after seeing Ash's (dope_as) 2 toned blue machine in the flesh - it had to be done!!
So today, bit of spare time, so started work…
what you think!!
longer term will see whole bottom half of car done, then flatted back and re-applied, if it do laquer, it will stay satin - but for now
Posted
Old Timer
though i think you need to do round the inner edge of the doors abit more, unless its just how it looks in this pic:
"Lawsy" said
Posted
Old Timer
hurry up and do the rest and post more pictures !
suits the car really well i reckon…keep up the gd work
Posted
Local Hero
"dope_as" said
looks ace.
though i think you need to do round the inner edge of the doors abit more,
yes mate - door shuts not been done yet, this was just the start - I only hada couple of hours of spare time, so not bad for a start, had to fill and sand the dink in the door too as per pics V
- next is to do other side, then remove bumpers n do front n back - then to finish it all off will be door shuts etc etc..
2 tone more doors FTW….
Posted
Old Timer
i left my dinks in!
ash x
Posted
Local Hero
T
Call yourself a breast man? Donate to Breast Cancer Awareness.
Christian Cochrane is fundraising for Breast Cancer Campaign
http://www.vwgolfmk1.o…topic&t=108667&highlight=
Christian Cochrane is fundraising for Breast Cancer Campaign
http://www.vwgolfmk1.o…topic&t=108667&highlight=
Posted
Local Hero
foxy
Posted
Local Hero
foxymk1 said
oooo thats looks nice good choice pal,, now all u need to do is weld the back doors up
foxy
ha ha - erm nope - 2/3 doors are so last season!!! especially those ones with welded up rear windows!!
need to do that on my passat tho!!!
Posted
Posted
Local Hero
Rich
Posted
Local Hero
looks good - tax runs out end of month tho so will be sorning it…
Posted
Local Hero
Posted
Old Timer
Lawsy said
Noooooooooooo!!!!!!!
sorry to hear it mate. i guess you have your reasons.
much love.
ash x
Posted
Local Hero
Posted
Local Hero
There are too many online users to list.