Sportline MFA pcb - blown resistor identity
Posted
#1510201
(In Topic #200871)
Settled In
Cheers
Posted
Old Timer
Posted
Local Hero
Resistors are only a few pence from Maplins etc.
1988 Mk1 Golf GTi Cabriolet 1.8cc DX, K-jet. Daily drive. 317,000 miles and counting
1978 Mk1 Scirocco GLS 1.6cc FR, Webber carb. Weekend toy.
1978 Mk1 Scirocco GLS 1.6cc FR, Webber carb. Weekend toy.
Posted
Settled In
jellybelly said
this is a seriously difficult one
the only way of truely knowing is either get another set of clock, check and replace or finding a diagram for them
I bought a replacement set of mk1 gti clocks, but the pcb was different, so I cannot connect the green vac adapter for the mpg.
Posted
Settled In
mark1gls said
If some one has one apart at the moment you can tell what resistor is fitted by the coloured bands on it or if you could find a wiring diagram it may say on there?
Resistors are only a few pence from Maplins etc.
The existing resistor has blown to bits, so no chance of identifying it. Can't find any pics/info on the main site or Google !!
Posted
Local Hero
1988 Mk1 Golf GTi Cabriolet 1.8cc DX, K-jet. Daily drive. 317,000 miles and counting
1978 Mk1 Scirocco GLS 1.6cc FR, Webber carb. Weekend toy.
1978 Mk1 Scirocco GLS 1.6cc FR, Webber carb. Weekend toy.
Posted
Settled In
Posted
Newbie
Resistor are 39 Ohms
Thanks
Posted
Settling In
I'll leave some pictures from a board, it might help somebody One day.
This is a motometer unit from a 91 mk1 cabriolet rivage with MFA, actually has a problem, a bad PNP amplifier transistor, the one in a picture with the red test multimeter lead.
Posted
Local Hero
See my how to in the signature link.
What do Divorces, Great Coffee, and Car Electrics all have in common?
They all start with GOOD Grounds.
Where are my DIY Links?
They all start with GOOD Grounds.
Where are my DIY Links?
Posted
Settling In
Briano1234 said
While you have your Water temp gauge out, you might as well re-solder the leads to the pins, doen't take long an will make sure that your water temp gauge never goes flaky.
See my how to in the signature link.
Yes, did that and found out that my coolant level relay is kaput!
But the MFA is fixed! :-)
VW mk1 cabriolet MFA repaired - YouTube
There are too many online users to list.