My GTI, 2.0 16v progress...
Posted
Settled In
My GTI, 2.0 16v progress...
loads of bits im not completely happy with, idle air valve, rad, metering head, alternator etc but my priority at the moment is getting it running and getting it mot'd, then Ill revisit the engine bay for the final touches
Untitled by gtifanboy, on Flickr
could be running tomorrow? who knows
Posted
Settled In
My New Year's resolutions are: 1. Stop making lists. B. Be more consistent. 7. Learn to count.
Posted
Local Hero
1983 Golf 1.3 Driver:
Posted
Settled In
Posted
Settled In
Picked these up yesterday, Corbeau Pro-Series kevlar grp buckets, got offered them by someone at work cheapy.
Theyve got some names embroided on them but for £60 for the pair im buzzing Ive got a mate at work who can help me out with getting them retrimmed, but I reckon Im just going to get some extended cushions made that cover up the stitching, I did a mock up by using 2 back cushions on one seat and it looked decent.
Now I just need to work out how to mount them
Untitled by gtifanboy, on Flickr
Untitled by gtifanboy, on Flickr
Posted
Settled In
bonus85 said
hey mate very good work here! what engine mount did you use for the drivers side? mine is round but i seem to be missing the bracket that holds it to the engine…
It was already on mine when I bought it as its out of another mk1 but it seems to just be welded to a flat plate that bolts on underneath the cam belt. dont know if this helps much sorry
Posted
Settled In
Posted
Settled In
Posted
Settled In
Posted
Settled In
Posted
Settled In
Posted
Settled In
Posted
Local Hero
Andy
LINCOLNSHIRE REGION - https://www.facebook.com/groups/467122313360002/
1983 MK1 Golf GTI Campaign Model - Under (looooong) resto!
1962 Rover P4 80
2002 BMW 745i
2008 BMW Z4 2.5Si
LINCOLNSHIRE REGION - https://www.facebook.com/groups/467122313360002/
1983 MK1 Golf GTI Campaign Model - Under (looooong) resto!
1962 Rover P4 80
2002 BMW 745i
2008 BMW Z4 2.5Si
Posted
Moderator
Posted
Settled In
not sure what direction im going to take with the engine but whatever it is ill do it properly, a sump full of shavings sucks
Posted
Moderator
Posted
Settled In
Figured id give the whole lot a refresh whilst ive got it out to do the crank
Untitled by gtifanboy, on Flickr
Untitled by gtifanboy, on Flickr
Untitled by gtifanboy, on Flickr
Oily gunky pistons
Untitled by gtifanboy, on Flickr
Cleaned up ok
Untitled by gtifanboy, on Flickr
Posted
Settled In
Posted
Moderator
Best of luck getting it sorted.
Smudger
Posted
Settled In
Split the engine and sold,
and got myself a nice ABF to go in The plan is a simple strip/clean/paint/service and then it can go in (after abit of exhaust manifold tweaks)
Finding it hard to get time to work on the car at the min though so progress may be slow
There are too many online users to list.