Papyrus Green Bermuda import
Posted
#1060627
(In Topic #126721)
Settling In
Papyrus Green Bermuda import
One pic for now….will get it cleaned later and get more picks up
Posted
Old Timer
Posted
Settling In
So 1st thing tonight was to get to back up an running as it's not been started since DC10.5. So new battery that was picked up from Brian at the Van centre on Saturday was fitted, turned over and over and over and nowt. Jumped it onto a W8 battery and hey presto running. Quick blast round the block (well slow really :redfaced: :redfaced: ) to make sure all was well and back into the garage.
Next up analyse the rust an whats gonna need to get sorted. Bay is shockin so reccon it's gonna be engine and box out for the re-spray to do it properly. Bonnet also has a lil bit of rust on the leading edge so maybe will replace that as well.
Then started having a look at the arches. As with most mk1's they have the plastic arch spats which are brilliant at storing water an sh!t ready for rusty rusty 8O 8O
But looky looky
Only a tiny bit of bubble down at the bottom
Then got down to getting the tailgate off as it's scrap.
So a lil bit of progress, but it's great working on a mk1 again…..everything is so easy
Posted
Settling In
Started with getting the wings off ready for the new ones going on when it gets painted.
Drivers side was original and anyone that knows how good VW were with the original underseal knows they can be a bitch to get off, but came off anyhow. Passenger side was a replacement part so came off in 2 ticks
Anyways was desperate to see what condition the inner wings were in and lo and behold…..minty fresh
So wings and bonnet are off, all wiring is sitting on the engine ready for the engine and box to come out. Rad etc is all out along with grille and lights etc….not much to do before the 19th
Also took a speaker off expecting to see original speakers, but nice lil JBL replacements
Posted
Local Hero
Have you re done the auto box ATF?
There is a sticky on it in the running gear section probably, with a step by step I did on changing the fluid. So much better once this is done.
Love the colour too. This will look nice once it's done.
Where is the tailgate?
"Making Cabbies More Beautiful One Roof at a Time"
Posted
Settling In
Not done anything with the engine or box yet, but the fluid change sounds good as it tends to lurch into gear at times. With the engine and box out I'll give it a good old clean up. Runs fine other than that.
As for the tailgate I took it off as it was too far gone along the bottom edge. Picked one up thats de-locked and badged which fits very well with my plans for the car
Posted
Local Hero
I have seen worse needing lots of welding so that has stood the test of time fairly well.
What's the plans on the hood?
There us a similar car on here in colour that has, by the looks of it an original tan coloured top.
"Making Cabbies More Beautiful One Roof at a Time"
Posted
Settling In
chortle said
Looks pretty solid though.
I have seen worse needing lots of welding so that has stood the test of time fairly well.
What's the plans on the hood?
There us a similar car on here in colour that has, by the looks of it an original tan coloured top.
Hood is near new so that will be staying, but lots of other stuff planned that include these :mrgreen:
and
Posted
Settled In
Posted
Settled In
Posted
Settling In
Only 15 mins away and have done lots of stuff for me. Daz did this on my other car….epic work removing cast lines and original finish….best in the business
Posted
Local Hero
Diesel Possessed
A97JCE
Feeby
A97JCE
Feeby
Posted
Settled In
Posted
Settling In
Not in the bay
Need to do a bit of tidying on the engine and box
Front panel getting replaced
Goes in for paint on Sunday…..can't wait
Posted
Settling In
Not in the bay
Lil tidying to do
Front panel getting replaced
Got picked up for painting on Sunday so started tidying the engine and box. Lots still to do, but a good start 8)
Posted
Settling In
Posted
Settling In
Primer blocked and masked up ready for final paint
Paint finish from the gun, still to be blocked and polished
Posted
Settling In
Posted
Settling In
Inka said
Looks like a great job out of the gun, I'm loving that colour!
Took my time to choose the guy doing it and have seen a bit of his work and he's proper good. He's taking his time and it should be perfik by the time I get it back…..can't wait
Posted
Old Timer
0 guests and 0 members have just viewed this: None.