Skip navigation

G60 Conversion

Post

Back to the top
Ok guys have just bought an AGU 20v engine :DMy intention is to put a K03s turbo on her, I don't want anything too crazy that I spin all the way down the road.

Now I have picked up various bit's and pieces off the forum about what is required and what's not but I might need a bit of advice as my car has a non standard engine in already!

I have everything off an 83 gti to fill in any gaps due to my current car being a small block chassis.

Will have some pics tomorrow of what I've taken on!

Anyway, the engine is from an Audi A3 and it came with a cable gearbox and shifter (will find exact model number).

Cheers

Rich

Last edit: by Rich.

Post

Back to the top
Another thing, I have been trying to get on qpeng's site as I may use their ecu and loom service but their website seems unavailable. Are they still trading?

Cheers

Post

Back to the top
Cant help you I'm afraid Rich but just wanted to say good luck with the build, look forward to seeing it evolve ;)

Andy

LINCOLNSHIRE REGION - https://www.facebook.com/groups/467122313360002/

1983 MK1 Golf GTI Campaign Model - Under (looooong) resto!
1962 Rover P4 80
2002 BMW 745i
2008 BMW Z4 2.5Si

Post

Back to the top
Thanks Andy, I think it might be a case of all the gear no idea though lol

First bit of bad news though. The engine arrived damaged :(I don't know how the couriers could have done this but the rocker cover is squashed at the front, ecu was on the engine in the same place and was squashed, instrument panel was on top and shattered and finally the loom was damaged.

The seller is apparently going to send me replacement parts next week.
gallery_23668_406_63593.jpg gallery_23668_406_69433.jpg gallery_23668_406_104108.jpg gallery_23668_406_112576.jpg gallery_23668_406_167440.jpg

Last edit: by Rich.

Post

Back to the top
Oh no that's not good at all. At least he's sending out replacements

Andy

LINCOLNSHIRE REGION - https://www.facebook.com/groups/467122313360002/

1983 MK1 Golf GTI Campaign Model - Under (looooong) resto!
1962 Rover P4 80
2002 BMW 745i
2008 BMW Z4 2.5Si

Post

Back to the top
Ok some good news, back on track. Replacement parts arrived today :) gallery_23668_406_16382.jpg gallery_23668_406_22589.jpg gallery_23668_406_85374.jpg gallery_23668_406_150755.jpg

Last edit: by Rich.

Post

Back to the top
Going to get my engine mounted on a stand and start cleaning it down and restoring components.

I want to give my new rocker cover a thorough clean, can anyone recommend a cleaner I can use and soak the cover in.

Post

Back to the top
Oh good news ;)

Andy

LINCOLNSHIRE REGION - https://www.facebook.com/groups/467122313360002/

1983 MK1 Golf GTI Campaign Model - Under (looooong) resto!
1962 Rover P4 80
2002 BMW 745i
2008 BMW Z4 2.5Si

Post

Back to the top
Started to make a shopping list of parts required. Would appreciate any input re parts I've chosen or missed out. Already nearing 3k!

G60 Fly Wheel & VR6 Clutch £243.50 http://www.ebay.co.uk/itm/VW-GOLF-MKIV-1-8-TURBO-G60-FLYWHEEL-SACHS-VR6-CLUTCH-/360511470691?pt=LH_DefaultDomain_3&hash=item53f0287c63
Turbo K03s £300.00 (guestimate for second hand)
Intercooler £125.00 http://www.toysauto.co.uk/product_info.php?pName=front-mount-intercooler-mk1-golf-gti-20v-turbo-cupra-1
Engine / gearbox mounts £195.00 http://www.justcaddys.com/20v-18-turbo-mk1-mounting-kit.html
Loom conversion  £100.00 (guestimate)
Ecu  unlock £75.00 (guestimate)
Exhaust manifold £212.60 http://www.toysauto.co.uk/product_info.php?pName=vw-golf-gti-20v-audi-a3-tt-leon-turbo-exhaust-manifold&cName=manifolds
Turbo Downpipe £176.00 http://www.qpeng.com/component/option,com_virtuemart/page,shop.product_details/flypage,shop.flypage/product_id,19/Itemid,75/
Forge Turbo inlet pipe £151.41 http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=1703&product=FMGOLFIND
Turbo Pipes £100.00 (guestimate)
Cambelt kit and water pump £200.00 (guestimate)
Oil, coolant, filters, plugs etc £100.00 (guestimate)
Air Filter £80.00 (guestimate)
Brakes (G60 calipers, lines, discs, pads) £300.00 (guestimate)
Slimline radiator  (not sure if this is required as have top mount rad at present)
Fans (again not sure if necessary)
Fuel components  (Not really sure what I need yet as have carb tank )
Further tuning to goal power £400.00 (max possible torque)
100mm Drive shafts and cups £144.99 http://www.ebay.co.uk/itm/MK1-GOLF-100mm-conversion-drive-shafts-1-8t-2-0-16v-vr6-brand-new-/290896445600?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item43bac780a0


 Total £2903.50

Last edit: by Rich.

Post

Back to the top
Started to strip the engine down today. Removed the wiring loom and gearbox. Was about to mount it to my Clarke engine stand but don't have any M12 bolts, will pick some up tomorrow.

Does anybody have any tips for removing the flywheel without the special 3067 that locks it in place?
gallery_23668_406_145850.jpg gallery_23668_406_153319.jpg gallery_23668_406_167655.jpg

Last edit: by Rich.

Post

Back to the top
Great project going on dude. Loving the colour of the MK1 too. Going to be a awesome build when finished. Best of luck with it sir :)

Post

Back to the top
Cheers buddy, I've been following your build too. Yours is going to be awesome.

I hope there is a way I can reduce the number of pipes!
I can't believe how many I've removed so far!! lol

Post

Back to the top
Yeah you will be able to lose a few during the conversion. Will you be fitting an oil catch tank as well???

Post

Back to the top

smudger1980 said

Yeah you will be able to lose a few during the conversion. Will you be fitting an oil catch tank as well???

Yes will fit a catch tank :)

Post

Back to the top
I have ordered up my mounts from retrofication http://www.retrofication.co.uk/mk1-golf-18t-20vt--19tdi-06a-block-5-speed-02j-engine-mount-kit-186-p.asp and just wondered if I required any additional mounts other than the 3 in the kit.

What rubber bushes should I order up for these?

Cheers

Rich

Post

Back to the top
Oh engine is on stand ready to strip :) gallery_23668_406_46500.jpg
gallery_23668_406_335009 (1).jpg

Last edit: by Rich.

Post

Back to the top
Hi just reading ur thread & if u need a turbo iv got a ko4 from a 225 tt. That I'm selling £200. But it hs a crack on the exhaust side. That needs welding up. If u interested let me know. Cheers 

Post

Back to the top
Hi. Very nice looking car, love the yellow paint with the dark wheels. Hopefully you got the bad luck that comes with all mk1 golf projects out of the way at the start with the broken engine, fingers crossed  :lol:good luck with the project.
matt

Post

Back to the top
I hope so lol, thanks for the comments about the car.

pazwaa said

Hi. Very nice looking car, love the yellow paint with the dark wheels. Hopefully you got the bad luck that comes with all mk1 golf projects out of the way at the start with the broken engine, fingers crossed  :lol:good luck with the project.
matt

Post

Back to the top
Going to be a awesome build when finished. Best of luck with it sir




____________________________________________________________
__
WOW Gold|Wow Gold Kaufen|Diablo 3 Gold|Guild Wars 2 Gold
0 guests and 0 members have just viewed this: None.