Skip navigation

need breather pipe part numbers

Post

Back to the top
hi all

have been having idle issues recently since I did a mini service at home, eventually found the culprit today which is a split breather hose, on the short pipe just after the t-piece that runs into the inlet manifold. the pipe that leads to this t-piece is also showing signs of perishing.

I have done a temporary repair this afternoon with pipe repair tape and all is working very smoothly, but I would like to avoid this situation in the future and replace all the breather pipes.

can anyone give me part numbers for a 91 Rivage please? and the best place to get these from please?

I will pop up a picture of the affected pipes tomorrow.

 

Guy

91 Rivage project thread < its a slow process but getting there!

Post

Back to the top
Had the same issues mate Crazyquiffs sorted me out

91Jreg Sportline (now gone) For now 88 Ereg Mk2 16v (monza blue ) (now its gone too)Numerous mk1 tintops I  should never have sold 😰  Oh and a TDI  Touran as a daily ….latest toy mk5 Gti (showing my age) had to go serious money pit ,now cruising a Caddy Van

Post

Back to the top
pics as promised




Guy

91 Rivage project thread < its a slow process but getting there!

Post

Back to the top
I got mine from VW and they was not that expensive, try giving them a call.

1988 Mk1 Golf GTi Cabriolet 1.8cc DX, K-jet. Daily drive. 317,000 miles and counting
1978 Mk1 Scirocco GLS 1.6cc FR, Webber carb. Weekend toy.

Post

Back to the top

mark1gls said

I got mine from VW and they was not that expensive, try giving them a call.

you don't have part numbers do you? Ideally that is what I am after! :)

Guy

91 Rivage project thread < its a slow process but getting there!

Post

Back to the top
Try this website…
partsbase.org
 

1988 Mk1 Golf GTi Cabriolet 1.8cc DX, K-jet. Daily drive. 317,000 miles and counting
1978 Mk1 Scirocco GLS 1.6cc FR, Webber carb. Weekend toy.

Post

Back to the top

mark1gls said

Try this website…
partsbase.org
 

blindin!!  :thumbs:

Guy

91 Rivage project thread < its a slow process but getting there!
0 guests and 0 members have just viewed this: None.